Eaton
Eaton 10250T706G 30 mm Hazardous Location Push Button Green 1NO/1NC
30 mm hazardous-location push button with green flush metal head, 1NO/1NC contacts rated 10A at 600V AC and 2.5A at 250V DC, NEMA 12/13/3/3R/4/4X and IP65 sealed with factory-sealed construction.
- Engine BrandEATON
- Engine Size30 mm
- Green flush operator for clear visual status
- 30 mm metal bezel fits standard panel cut-outs
- 1NO/1NC screw-clamp contacts rated 10 A at 600 V AC
- Factory-sealed with IP65 and NEMA 4X protection
- Certified to CE, CSA and UL standards
Hazardous-Location Push Button for Industrial Panels
This green 30 mm momentary push button is built for hazardous-location panels and carries NEMA 12, 13, 3, 3R, 4 and 4X ratings plus IP65 sealing. It is suited for maintenance technicians and OEMs who need a single flush operator with factory-sealed contacts and grounding nibs. The screw-clamp terminals accept standard wiring without special tools.
1NO/1NC Contact Block Rated 10A at 600V AC
The decisive specification is the contact form 1NO/1NC rated 10A at 600V AC and 2.5A at 250V DC under NEMA designations A600 and Q300. This rating determines whether the device can switch the control-circuit load in the target application. Buyers who need a different contact arrangement or higher current capacity cannot use this part.
Sustained Operation in Wet and Dusty Environments
Under continuous duty the metal bezel and head resist corrosion while the drainage holes prevent fluid buildup behind the panel. The IP65 and NEMA 4X ratings mean the seal holds during wash-down and prolonged exposure to dust or splashing water. Buyers who require extended-temperature ratings beyond the listed standards should verify suitability before specifying this operator.
Highlights
- Green flush operator for clear visual status
- 30 mm metal bezel fits standard panel cut-outs
- 1NO/1NC screw-clamp contacts rated 10 A at 600 V AC
- Factory-sealed with IP65 and NEMA 4X protection
- Certified to CE, CSA and UL standards
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
How does the 10 A at 600 V AC rating apply when the button is wired into a control circuit?
The contacts are rated for 10 A at 600 V AC and 2.5 A at 250 V DC, so the button can directly switch loads up to those limits without an interposing relay.
What does the A600 and Q300 contact rating designation cap in practice?
A600 covers 10 A at 600 V AC, and Q300 covers 2.5 A at 250 V DC, defining the maximum making and breaking currents for the respective voltage ranges.
What cut-out size and mounting style does the 30 mm metal bezel need?
The operator fits a standard 30 mm panel cut-out and uses a screw-clamp terminal block for secure wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
