Eaton
Eaton 10250T30B 30 mm Industrial Push Button, Black, 10A 600V
A 30 mm metal push button rated 10A at 600V with IP65 sealing and NEMA 12, 13, 3, 3R, 4, 4X protection
- Engine BrandEATON
- Engine Size30 mm
- 10 A 600 V AC contact rating handles heavy loads
- IP65 and NEMA 12, 13, 3, 3R, 4, 4X sealing resists dust and water
- 30 mm metal flush operator fits standard panels
- Momentary action with 1NO/1NC contacts suits control circuits
- CE, CSA and UL listed for code compliance
Industrial Push Button 30 mm
The Eaton 10250T30B is a 30 mm non-illuminated push button designed for industrial control panels. It carries a 10A at 600V AC contact rating and meets NEMA 12, 13, 3, 3R, 4, 4X plus IP65 for dust and water ingress protection. The momentary action operator suits start-stop and jog circuits in harsh environments.
Metal Head with Sealed Contacts
A chrome-plated zinc die-cast bezel and metal head provide mechanical durability. Enclosed silver contacts with reliability nibs resist contamination, while diaphragm seals and drainage holes maintain the IP65 rating. Screw-clamp terminals accept solid or stranded wire without special tools. Grounding nibs on the operator body simplify panel bonding.
Suited for Harsh-Duty Panels, Not Light-Duty
This device fits panels that need NEMA 4X or IP65 sealing and a 10A 600V rating. Buyers who need an illuminated operator, a maintained action, or a different contact configuration should look at other models. Panels requiring a smaller cut-out or a plastic bezel will not match this 30 mm metal construction.
Highlights
- 10 A 600 V AC contact rating handles heavy loads
- IP65 and NEMA 12, 13, 3, 3R, 4, 4X sealing resists dust and water
- 30 mm metal flush operator fits standard panels
- Momentary action with 1NO/1NC contacts suits control circuits
- CE, CSA and UL listed for code compliance
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
How often should the silver contacts and diaphragm seals be inspected on the 10250T30B?
The enclosed silver contacts and diaphragm seals are designed for long service life; periodic visual checks for contamination or seal wear are recommended in harsh environments.
At what point does the 10 A / 600 V rating limit continuous operation of the push button?
The contact rating of 10 A at 600 V AC sets the maximum electrical load; sustained current above 10 A will exceed the rated capacity.
Does the metal bezel and IP65 enclosure run hot or draw noticeable power when actuated continuously?
The operator is a passive mechanical switch with no coil or illumination, so it generates negligible heat and consumes no control power during continuous actuation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
