Eaton
Eaton 10250T23G Cutler-Hammer 30mm Green Industrial Push Button
A 30 mm momentary push button with metal head, 10A @ 600V AC contact rating, NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing
- Engine BrandEATON
- Engine Size30 mm
- Green flush button for clear visual status
- 30 mm metal operator fits standard panel cut-outs
- Momentary action with 1NO contact rated 10A at 600V AC
- NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing for harsh environments
- Diaphragm seals, drainage holes and enclosed silver contacts ensure reliable operation
Industrial 30 mm Push Button
The Eaton 10250T23G is a 30 mm flush push button operator built for industrial control panels. It carries a 10A at 600V AC contact rating with a single normally open contact block. The chrome-plated zinc die-cast bezel and metal head suit operators who need a rugged, panel-mounted momentary switch.
Sealed for Continuous Duty
Diaphragm seals and drainage holes protect the enclosed silver contacts during sustained use in wet or dusty environments. NEMA 12, 13, 3, 3R, 4 and 4X ratings plus IP65 confirm resistance to oil, water and corrosion. Grounding nibs and reliability nibs maintain electrical continuity through repeated actuation cycles.
Replaces Worn 30 mm Operators
This unit fits existing 30 mm cut-outs where a momentary green push button is specified. The screw-clamp terminals accept the same wiring as legacy Cutler-Hammer operators. The jump is worth it when the original seal has failed or the contact block no longer holds rating.
Highlights
- Green flush button for clear visual status
- 30 mm metal operator fits standard panel cut-outs
- Momentary action with 1NO contact rated 10A at 600V AC
- NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing for harsh environments
- Diaphragm seals, drainage holes and enclosed silver contacts ensure reliable operation
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
Does the 10 A / 600 V AC contact rating generate noticeable heat when the button is cycled continuously all day?
The contact is rated for 10 A at 600 V AC; normal momentary operation produces negligible heat and no audible noise.
What mounting cut-out and panel thickness does the 30 mm operator require?
It fits a standard 30 mm panel cut-out and clamps to typical industrial panel thicknesses with the supplied screw terminals.
Will the chrome-plated zinc bezel and NEMA 4X / IP65 sealing hold up next to older oil-tight push-button stations?
Yes — the NEMA 12, 13, 3, 3R, 4, 4X and IP65 ratings match or exceed legacy oil-tight enclosures, and the chrome-plated zinc die-cast bezel resists the same cutting fluids and wash-downs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
