Eaton
Eaton 10250T197LGP2A Cutler-Hammer Pilot Light 120VAC Green 30 mm
A 30 mm green LED pilot light for 120 V AC panels, rated NEMA 12, 13, 3, 3R, 4, 4X and IP65 with a chrome-plated zinc body and pressure-plate terminals
- Engine BrandEATON
- Engine Size30 mm
- Green LED indicator for clear status at 120 V AC
- 30 mm chrome-plated zinc die-cast body with NEMA 12, 13, 3, 3R, 4, 4X rating
- IP65 sealed construction resists dust and water ingress
- Pressure-plate terminals simplify wiring during installation
- CE, CSA and UL listed for code-compliant panels
Eaton Cutler-Hammer Pilot Light 120 V AC
This Eaton 10250T197LGP2A pilot light provides green LED indication at 120 V AC in a 30 mm round housing. The chrome-plated zinc die-cast body and Fresnel plastic lens meet NEMA 12, 13, 3, 3R, 4, 4X and IP65 ratings. CE, CSA and UL standards are listed. The full-voltage LED module uses pressure-plate terminals.
Panel builders needing a green 120 V AC indicator
Suits control panels, motor starters and industrial enclosures that require a compact 30 mm green pilot light with IP65 sealing. Not for applications that demand a different lens colour, a separate transformer module or a voltage other than 120 V AC. Buyers who need multi-colour or flashing indication should look elsewhere.
Simple 30 mm panel cut-out installation
The operator mounts in a standard 30 mm round cut-out and secures with a locking nut. Pressure-plate terminals accept stripped wire without special tools. The included lamp module (replacement 39R132) snaps into the operator body. Common issues are over-tightening the nut, which can crack the plastic lens, and reversing line and neutral on the pressure-plate terminals.
Highlights
- Green LED indicator for clear status at 120 V AC
- 30 mm chrome-plated zinc die-cast body with NEMA 12, 13, 3, 3R, 4, 4X rating
- IP65 sealed construction resists dust and water ingress
- Pressure-plate terminals simplify wiring during installation
- CE, CSA and UL listed for code-compliant panels
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
What voltage supply must already be present for the 120V AC pilot light to operate?
A 120V AC circuit is required; the unit is a full-voltage LED module rated for 120V AC.
Can the 30 mm chrome-plated zinc die-cast body be mounted in the same cut-out as legacy 30 mm push-button stations?
Yes, the 30 mm mounting diameter matches standard 30 mm panel cut-outs used by older Cutler-Hammer stations.
How can I confirm the green LED is functioning correctly after wiring the pressure-plate terminals?
Apply 120V AC; the green Fresnel lens should illuminate steadily, indicating the LED module is energised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
