Eaton
Eaton 10250T197HLRP2A Cutler-Hammer Pilot Light LED 120VAC Red 30mm
A 30 mm red LED pilot light for 120 V AC panels with IP65 and NEMA 4X ratings
- Engine BrandEATON
- Engine Size30 mm
- Red LED indicator for clear status signalling at 120 V AC
- 30 mm mounting diameter fits standard panel cut-outs
- NEMA 12, 13, 3, 3R, 4, 4X ratings protect against dust and water ingress
- IP65 enclosure resists jets and dust in harsh environments
- Metal body with Fresnel plastic lens ensures durable, visible illumination
Industrial Pilot Light for 120 V AC Panels
The Eaton 10250T197HLRP2A is a 30 mm red LED indicating light designed for 120 V AC control circuits. It mounts in standard panel cut-outs and carries NEMA 12, 13, 3, 3R, 4, 4X plus IP65 ratings for dust and water ingress protection. CE, CSA and UL listings confirm compliance with North American and European safety standards. Builders who need a different voltage, colour or terminal style must select another part.
Passive Thermal Behaviour and Power Draw
The LED lamp module operates at full 120 V AC without an external resistor, so heat rise inside the enclosure is minimal during normal indication duty. The metal body and plastic Fresnel lens dissipate the few watts generated by the LED without forced airflow. No fan or heatsink is required and the unit adds negligible load to the control-circuit supply. Installations that demand active cooling for indicator lights will not be satisfied by this device.
Sustained Load Performance
Under continuous energisation the lamp maintains steady light output and the saddle-clamp terminals remain secure without retightening. The full-voltage LED module is rated for the same 120 V AC supply indefinitely, so brightness does not decay in a short burst. NEMA 4X and IP65 seals retain their integrity through extended temperature cycling. Applications requiring flashing or pulsed operation should verify compatibility with the constant-on design.
Highlights
- Red LED indicator for clear status signalling at 120 V AC
- 30 mm mounting diameter fits standard panel cut-outs
- NEMA 12, 13, 3, 3R, 4, 4X ratings protect against dust and water ingress
- IP65 enclosure resists jets and dust in harsh environments
- Metal body with Fresnel plastic lens ensures durable, visible illumination
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
How do I wire the saddle-clamp terminals on this 30 mm pilot light?
Strip each conductor to the recommended length, insert into the saddle-clamp openings and tighten the captive screws until the wire is held firmly without damaging the insulation.
What part will need replacement first on this 120 V AC LED indicator?
The integrated LED module is not field-replaceable; the entire pilot light is replaced once light output degrades below usable levels.
Which environmental rating limits continuous operation in a wet, dusty enclosure?
The IP65 rating permits sustained exposure to low-pressure water jets and dust ingress, while the NEMA 4X rating adds corrosion resistance for harsh wash-down areas.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
