We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thirty small rectangular thermal pads in six sizes, grey silicone finish, soft and slightly sticky

Easycargo 30-B-Si-3W Thermal Pad Kit 30pcs Multiple Sizes 3 W/mk

SKU CH-X4ZJ-PX38P

Thirty silicone pads in six thicknesses up to two millimetres fill gaps on CPUs, chipsets and NVMe drives with 3 W/mk conductivity

  • Color30pcs 20x20x1mm
  • Dimension40 L x 40 W x 0.5 H millimeters
  • 3 W/mk conductivity transfers heat efficiently from CPU and GPU components
  • 30 pre-cut pads in six thicknesses fit NVMe SSD, IC chips and motherboard gaps
  • Soft sticky silicone cuts to custom shapes without tools for quick installation
  • Non-conductive anti-static material protects circuits while operating from -40 to 200 °C
  • Replaces messy thermal paste with clean pads that leave no residue on metal surfaces

30-piece thermal pad kit with 3 W/mk conductivity

The Easycargo 30-B-Si-3W kit supplies thirty silicone thermal pads in six different thicknesses and footprints. Each pad is rated at 3 W/mk thermal conductivity and is designed to fill gaps between IC chips, NVMe M.2 SSDs, motherboard components and heatsinks. The material is non-conductive, anti-static and remains stable from -40 to 200 degrees Celsius without melting or emitting odour.

Replaces thermal paste for gap-filling applications

Unlike traditional grease or tape, these soft, slightly sticky pads conform to uneven surfaces and can be trimmed to any shape with scissors. The jump is worthwhile when a component sits above the heatsink base or when multiple chip heights must be bridged in a single assembly. Builders who need a single uniform thickness for every contact will not find that here.

Consistent performance under continuous heat soak

The silicone compound maintains its conductivity and physical integrity during prolonged loads, resisting pump-out and dry-out that affect paste over time. Pads compress to fill microscopic voids and provide electrical isolation while transferring heat from VRAM, voltage regulators or SSD controllers. The assortment includes 0.5 mm, 1 mm and 2 mm thicknesses so sustained contact pressure is preserved across varied stack heights.

Highlights

  • 3 W/mk conductivity transfers heat efficiently from CPU and GPU components
  • 30 pre-cut pads in six thicknesses fit NVMe SSD, IC chips and motherboard gaps
  • Soft sticky silicone cuts to custom shapes without tools for quick installation
  • Non-conductive anti-static material protects circuits while operating from -40 to 200 °C
  • Replaces messy thermal paste with clean pads that leave no residue on metal surfaces

Specifications

BrandEasycargo
Model30-B-Si-3W
Part Number30-B-Si-3W
Color30pcs 20x20x1mm
Dimension40 L x 40 W x 0.5 H millimeters

Questions about this item

Which thicknesses are included so the pads match the gap on my laptop heatsink?

The kit supplies six thicknesses: .5 mm, 1 mm and 2 mm across the 30 pieces.

What is the installation step people most often miss with these soft sticky pads?

Remove both protective films, cut the pad to the exact component outline, then press evenly so no air pockets remain.

When should the pads be replaced to keep thermal performance consistent?

Replace them whenever the heatsink is removed or if the material hardens after prolonged exposure near the 200 °C upper limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.