EarFun K1 Wired Kids Headphones 85/94dB Black/Red
Over-ear wired headphones for children with 85dB or 94dB volume limits, a built-in microphone, 3.5mm share port and 40mm drivers
- TypeOver the Ear
- ColorBlack/Red
- Frequency Response5Hz-20KHz
- THDOver Ear
- Input Impedance32 ohms
- Signal to Noise Ratio(SNR)100 decibels
- Hearing protection with 85/94dB volume limit
- Built-in microphone and inline controls for calls
- SharePort allows audio sharing without splitter
- 40mm drivers deliver stereo sound with rich bass
- Foldable design with tangle-free braided cable
Kid-safe wired headphones with volume limit
EarFun K1 wired headphones are built for children and capped at 85 dB or 94 dB to protect young ears. They use recycled materials that meet CPC and CPSIA standards. A 3.5 mm plug and inline microphone support schoolwork, calls and entertainment. The 40 mm drivers deliver stereo sound with rich bass and crisp highs.
Check the device has a 3.5 mm audio jack
The headphones connect only through a 3.5 mm AUX cable, so the tablet, laptop or phone must provide that port. No battery or charging is required because the model is fully passive. The nylon-braided cord resists tangles and the foldable frame survives drops and twists. A sharing jack on the cable lets a second listener join without a splitter.
Upgrades basic earbuds or unprotected headsets
The jump is worth it when a child needs hearing protection, a built-in microphone for class and a rugged cable that withstands daily handling. The 85/94 dB limit replaces uncontrolled volume on standard earbuds. The sharing port replaces a separate splitter for sibling listening. Buyers who need wireless freedom or active noise cancellation should look elsewhere.
Highlights
- Hearing protection with 85/94dB volume limit
- Built-in microphone and inline controls for calls
- SharePort allows audio sharing without splitter
- 40mm drivers deliver stereo sound with rich bass
- Foldable design with tangle-free braided cable
Specifications
| Brand | EarFun |
|---|---|
| Model | EarFun K1 Wired Kids Headphones, EarFun K1 |
| Part Number | EarFun K1 |
| Type | Over the Ear |
| Color | Black/Red |
| Frequency Response | 5Hz-20KHz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 100 decibels |
| Power Supply | false |
| Sensitivity | 100 decibels |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Weight | 175 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 100 decibels |
| Microphone Sensitivity | 100 decibels |
| Features | sound_isolation, Retractable, Button Control, push_button, Wired, Over Ear, dynamic_driver, 32 ohm |
Questions about this item
Does the EarFun K1 come with everything needed to plug straight into a tablet, or must I buy a separate cable?
The headphones have a fixed 3.5 mm AUX cable with an in-line microphone and share-port, so no extra cable is required for any 3.5 mm device.
Should I choose the 85 dB or 94 dB volume limit for my child?
The default setting is 85 dB for everyday safe listening; switch to 94 dB only when ambient noise is high and you need extra volume headroom.
How loud will the 100 dB sensitivity and 40 mm drivers actually sound at the 85 dB cap?
At the 85 dB limit the output stays well within safe levels while the 40 mm drivers still deliver full stereo bass and clear highs for study or play.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



