Eagle Tool Us
Eagle Tool Us ESP75018 Flexible Drill Bit 3/4 in x 18 in
Flexible drill bit reaches 16 in deep with a 18 in shaft and 1/4 in hex shank
- TypeDrill Bits
- MaterialHAWA
- Flexible shaft reaches 16 in depth in tight spaces
- Screw-point tip pulls bit through wood without extra force
- 18 in overall length spans studs and joists
- 1/4 in hex shank locks securely in standard chucks
- Powder-coated HAWA steel resists wear and corrosion
Eagle Tool ESP75018 Flexible Drill Bit
This Eagle Tool ESP75018 flexible drill bit measures 18 inches overall with a 3/4 inch diameter. The powder-coated HAWA steel construction includes a screw point for self-feeding through wood. A 1/4 inch hex shank with three flats locks securely into quick-change chucks.
Electricians and low-voltage installers pulling
The 16 inch maximum drilling depth suits typical wall cavities and floor joists. Users needing longer reach or larger diameter holes should consider other options. The straight-flute design is not suited for aggressive metal drilling or masonry work.
Powder coating and screw point improve chip ejection
The factory powder coating reduces friction and resists corrosion during extended use. The screw point pulls the bit forward automatically, reducing operator fatigue when drilling multiple holes. No additional accessories or software are included with this bit.
Highlights
- Flexible shaft reaches 16 in depth in tight spaces
- Screw-point tip pulls bit through wood without extra force
- 18 in overall length spans studs and joists
- 1/4 in hex shank locks securely in standard chucks
- Powder-coated HAWA steel resists wear and corrosion
Specifications
| Brand | EAGLE TOOL US |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
What size drill chuck is needed for the 1/4 in hex shank on this bit?
The 1/4 in hex shank fits standard 3/8 in or 1/2 in drill chucks that accept hex shanks; tighten securely on the three flats.
Can this 18 in bit reach through a 2 x 4 wall plate and still have clearance for the drill?
With a 16 in maximum drilling depth and 18 in overall length, it clears a standard 2 x 4 plate and leaves room for the drill body.
How do I confirm the screw point is pulling the bit through cleanly?
The screw point should self-feed with light pressure; steady rotation and smooth chip ejection show it is working as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
