Eagle Tool Us
Eagle Tool Us EM37524 Flexible Drill Bit 3/8in 24in
A 24-inch flexible drill bit with a 3/8-inch diameter and 16-inch maximum drilling depth for masonry and cable installation
- TypeDrill Bits
- MaterialHAWA
- Drills through masonry easily with a 24 inch overall length
- Reaches deep cavities up to 16 inch drilling depth
- Fits standard chucks using a 3/16 inch hex shank
- Resists wear with a powder coated finish
- Designed for cable installer tasks with three flats on shank
Flexible Drill Bit for Cable Installation
The Eagle Tool US EM37524 is a 3/8 inch diameter flexible drill bit designed for masonry and cable installation tasks. Its 24 inch overall length allows extended reach through walls and framing members. The shank features a 3/16 inch hex diameter with three flats for secure chuck grip. This accessory targets electricians and installers running wire through existing structures.
Powder Coated Finish and Drilling Depth
A powder coated surface protects the HAWA material during normal use in abrasive masonry. The bit achieves a maximum drilling depth of 16 inches within the 24 inch shaft length. Straight flute geometry with three flats on the shank aids chip removal and reduces slippage in the drill chuck. No cooling or lubrication system is integrated into the design.
Shank Geometry for Chuck Security
The 3/16 inch hex shank with three flats prevents rotation inside standard drill chucks under load. This geometry replaces the need for separate locking collars or adapters. No additional accessories, guides, or software are bundled with the bit. The product ships as a single cutting tool ready for immediate use.
Highlights
- Drills through masonry easily with a 24 inch overall length
- Reaches deep cavities up to 16 inch drilling depth
- Fits standard chucks using a 3/16 inch hex shank
- Resists wear with a powder coated finish
- Designed for cable installer tasks with three flats on shank
Specifications
| Brand | EAGLE TOOL US |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
How do I install the 3/8in flexible drill bit into my drill, and what step is often missed?
Insert the 3/16in hex shank fully into the chuck and tighten securely on the three flats to prevent slipping under torque.
What maintenance or replacement will the EM37524 need after extended use?
The powder coating resists corrosion; replace the bit when the cutting edges dull or the shaft shows permanent deformation beyond the 16in drilling depth.
What is the first limit I will hit when drilling continuously with this 24in bit?
The maximum drilling depth of 16in restricts how deep you can bore in a single pass before withdrawing to clear debris.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
