Eagle Tool Us
Eagle Tool Us EHS37518 Flexible Drill Bit 3/8in 18in pneumatic accessory
A flexible drill bit with a screw point for cable installation, 18 in overall length and 16 in maximum drilling depth
- TypeDrill Bits
- MaterialHAWA
- Flexible shaft reaches tight spaces with 18 in overall length
- Screw point starts holes cleanly in wood and drywall
- 16 in drilling depth handles long runs without extensions
- 3/16 in hex shank locks securely in drill chucks
- Powder-coated finish resists corrosion during extended use
Flexible Drill Bit for Cable Installers
This Eagle Tool US flexible drill bit is designed for cable installers who need to bore through studs and joists in finished walls. Its 18 inch overall length provides extended reach for drilling through multiple framing members. The screw point tip helps the bit self-feed and pull through wood without walking. Powder coating reduces friction and resists corrosion during repetitive use.
3/8 inch Diameter with 16 inch Drilling Depth
The bit cuts a 3/8 inch hole while the maximum drilling depth reaches 16 inches, leaving two inches of shank exposed for chuck engagement. This single dimension determines whether the bit can penetrate the total thickness of the assemblies you encounter on the job. If your typical path exceeds that depth, this bit will not complete the hole in one pass.
Straight Shank with Three Flats Prevents Slip
The 3/16 inch hex shank features three machined flats that lock securely in a standard drill chuck or quick-change adapter. This geometry stops the bit from spinning under high torque when the screw point engages dense lumber. No additional accessories or specialised holders are required beyond a common 3/8 inch capacity drill.
Highlights
- Flexible shaft reaches tight spaces with 18 in overall length
- Screw point starts holes cleanly in wood and drywall
- 16 in drilling depth handles long runs without extensions
- 3/16 in hex shank locks securely in drill chucks
- Powder-coated finish resists corrosion during extended use
Specifications
| Brand | EAGLE TOOL US |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
How deep can the 18-inch flexible bit actually drill?
The maximum drilling depth is 16 inches, leaving a short section at the shank for chuck engagement.
What chuck size does the 3/16-inch hex shank require?
It fits any standard drill chuck that accepts a 3/16-inch hex shank with three flats for grip.
Will the 3/8-inch diameter bit pass through a standard stud cavity?
Yes, the 3/8-inch diameter suits typical wood framing holes for cable pulling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
