We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic E26 E27 socket adapter with three prong outlet and retained bulb holder

E26/E27 Light Socket to Plug Adapter 1250W White

SKU CH-VT8M-8XJKH

Converts an E26/E27 light socket into a grounded 3-prong outlet while keeping the bulb socket for 1250W devices

  • Amps1250 watts
  • Compatibility/FitmentDC-Feekoon-11
  • Powers devices while keeping overhead light working using 2-in-1 E26/E27 socket converter
  • Installs in seconds by screwing into existing lamp holder with no wiring needed
  • Runs LED lights, cameras and small fans on standard 0-125 VAC household circuits
  • Withstands heat up to 165 °C thanks to flame-retardant PBT construction
  • Supports two- and three-prong plugs simultaneously up to 1250 W maximum load

E26/E27 Socket Converter

This adapter screws into a standard E26 or E27 medium base lamp holder and provides a grounded three-prong outlet while keeping the bulb socket available. It accepts both two and three-prong plugs so a light bulb and a device can be used at the same time. The unit is rated for 0-125 VAC with a maximum load of 1250 watts. Installation requires no wiring or tools.

Suited for Low-Power Devices

It works well for powering LED lights, security cameras, small fans, string lights or holiday decorations in garages, porches, basements and workshops. Buyers who need to run high-draw appliances such as heaters or power tools should look elsewhere because the 1250-watt limit and the lamp holder wiring will not support those loads. The adapter is also not intended for wet or damp locations.

Bowtie Grip and PBT Housing

The bowtie-shaped body gives extra grip for easier screw-in installation and adds a distinctive look. The housing uses flame-retardant PBT material rated for high-temperature resistance up to 165 degrees Celsius. No extra cords, switches or mounting hardware are included in the package.

Highlights

  • Powers devices while keeping overhead light working using 2-in-1 E26/E27 socket converter
  • Installs in seconds by screwing into existing lamp holder with no wiring needed
  • Runs LED lights, cameras and small fans on standard 0-125 VAC household circuits
  • Withstands heat up to 165 °C thanks to flame-retardant PBT construction
  • Supports two- and three-prong plugs simultaneously up to 1250 W maximum load

Specifications

Amps1250 watts
Compatibility/FitmentDC-Feekoon-11

Questions about this item

What type of light fixture must I already have to use the E26/E27 socket outlet adapter?

You need a standard E26 or E27 medium-base lamp holder; the adapter screws directly into that socket with no wiring required.

Can I still use a light bulb in the fixture while the 1250 W adapter is powering a device?

Yes, the 2-in-1 design retains a bulb socket so a lamp and a grounded 3-prong plug can operate simultaneously.

How can I confirm the adapter is functioning correctly after screwing it in?

The bulb lights and any plugged-in device powers on, showing the 0-125 VAC circuit is live through the heat-resistant PBT housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.