E-POWER
E-POWER TOP-FAN-2RGB1 120mm case fan 1600-1999 RPM 4-pin RGB
A 120 mm PWM case fan spinning at 1600–1999 RPM with RGB lighting and 13 dynamic plus 7 static modes
- TypeCase Fan
- CompatibilityCase
- RPM1600-1999 RPM
- Power Connector4 Pin
- Color2-Tone
- LEDRGB
- Quiet operation at 1600-1999 RPM for effective cooling
- 13 dynamic and 7 static RGB modes for custom lighting
- 4-pin PWM connector enables automatic speed control
- 4-pin LED cable connects to E-POWER RGB hub
- 12 V operating voltage for standard motherboard power
Single-fan RGB upgrade for E-POWER sets
This 120 mm PWM fan adds RGB lighting to an existing E-POWER fan kit. It connects to a standard 4-pin motherboard header for speed control and a separate 4-pin LED cable for the brand’s own hub or control box. The unit is designed for case mounting and runs on 12 V power.
Speed range 1600-1999 RPM
At the rated RPM band the fan delivers airflow suited to typical chassis ventilation. The 13 dynamic and 7 static lighting modes give a wide choice of effects without extra software. Headroom ends where the maximum RPM limit is reached or where the proprietary LED connector cannot reach the control box.
Quiet operation at 12 V with PWM regulation
The fan is described as quiet while running on 12 V and uses PWM to match speed to thermal load. Power draw stays within normal 4-pin header limits. Noise rises only when the curve pushes toward the top of the 1600-1999 RPM range.
Highlights
- Quiet operation at 1600-1999 RPM for effective cooling
- 13 dynamic and 7 static RGB modes for custom lighting
- 4-pin PWM connector enables automatic speed control
- 4-pin LED cable connects to E-POWER RGB hub
- 12 V operating voltage for standard motherboard power
Specifications
| Brand | E-POWER |
|---|---|
| Model | TOP-FAN-2RGB1 |
| Type | Case Fan |
| Compatibility | Case |
| RPM | 1600-1999 RPM |
| Power Connector | 4 Pin |
| Color | 2-Tone |
| LED | RGB |
| Shipping weight | 0.23 kg |
| Package size | 152 × 152 × 32 mm |
Questions about this item
Will this 120mm fan run quietly alongside my existing 1600 RPM case fans?
It operates between 1600 and 1999 RPM with a quiet design, so it should blend well with fans in a similar speed range.
How can I verify the RGB lighting is working correctly after I install it?
The fan offers 13 dynamic and 7 static lighting modes; once connected to an E-POWER RGB hub, you can cycle through them to confirm operation.
Does the box include the 4-pin PWM and 4-pin LED cables, or do I need to buy them separately?
Both a 4-pin PWM cable for the motherboard and a 4-pin LED cable for the E-POWER RGB hub are included with the fan.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



