E-buy
E-buy AC Adapter for Sony XBR-55X930D 24V 10A 240W
24 V 10 A 240 W AC adapter with DC cord and power cord replaces Sony XBR-55X930D part numbers ACDP-240E01, ACDP-240E02 and 149311713 through 149311731
- TypeAC Adapter
- Battery TypeLithium-Ion
- Replaces multiple Sony part numbers including 149311731
- Delivers 240 W at 24 V 10 A for XBR-55X930D
- Works worldwide on 100-240 V 50/60 Hz mains
- Includes both DC cord and free power cord
- New condition ensures reliable long-term operation
Sony XBR-55X930D Power Replacement
This AC adapter supplies 24 volts at 10 amps for the Sony XBR-55X930D television. It accepts a wide 100 to 240 volt input range at 50 or 60 hertz. The unit replaces the original ACDP-240E01 and ACDP-240E02 power modules. It ships new with a DC cord and a free mains lead included.
Two-Prong Input and DC Output
The adapter uses a standard two-prong wall plug for the AC side. A detachable DC cord connects the brick to the television power jack. This arrangement frees the set from a captive cable and lets the owner route the low-voltage lead separately. The 240 watt rating matches the factory specification for the XBR-55X930D panel.
Direct Swap for Listed Part Numbers
The adapter replaces Sony part numbers 149311713, 149311714, 149311715, 149311721, 149311722 and 149311731. It is a direct electrical match for the original 24 volt 10 amp supply. The upgrade is worth it when the original brick has failed or the cable is damaged. It is not for owners of other Sony models or different screen sizes.
Highlights
- Replaces multiple Sony part numbers including 149311731
- Delivers 240 W at 24 V 10 A for XBR-55X930D
- Works worldwide on 100-240 V 50/60 Hz mains
- Includes both DC cord and free power cord
- New condition ensures reliable long-term operation
Specifications
| Type | AC Adapter |
|---|---|
| Battery Type | Lithium-Ion |
Questions about this item
Will the 240W rating handle continuous load without shutting down?
The adapter delivers 24V at 10A for a steady 240W output, matching the original ACDP-240E02 specification for sustained operation.
Does the brick run hot or make fan noise during all-day use?
The unit is a sealed 2-prong AC adapter with no internal fan; it relies on passive cooling and will warm up under full 240W load but stays within normal operating temperature.
Which power cord do I need to have on hand before this works?
A standard IEC C7 2-prong mains lead is required; one free power cord is included in the box so no extra cable is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



