Dyno Racing
Dyno Racing 52mm Triple Gauge Kit Oil Pressure Volts Water Temp
A 52 mm triple gauge kit monitors oil pressure up to 100 psi, voltage from 8 to 16 V, and water temperature from 100 to 280 with illuminated chrome housings and an included installation kit
- TypeInstrument Clusters
- Gauge TypeOil Pressure
- Monitors engine vitals with three gauges in one kit
- Reads oil pressure from 0 to 100 psi for early warning
- Tracks coolant temperature from 100 to 280 degrees
- Shows electrical system health from 8V to 16V
- Illuminated chrome dials with red needles stay readable at night
Universal 52 mm Triple Gauge Kit
This 52 mm kit combines oil pressure, voltage and water temperature gauges in a single chrome housing with white faces and red needles. It is designed for 12 V automotive electrical systems and suits hot rods, classics and other vehicles where factory instrumentation is missing or inadequate. The mechanical gauges are illuminated for night-time visibility. A complete installation kit with sensors and fittings is supplied.
Practical Limits of the Mechanical Interface
The oil pressure gauge reads 0 to 100 psi, the volt meter covers 8 V to 16 V, and the water temperature gauge spans 100 to 280. These ranges are fixed by the gauge faces and cannot be recalibrated. The kit requires a 12 V supply for illumination and sensor operation. No instructions are included, so professional installation is strongly advised to ensure correct plumbing and wiring.
1/2 NPT Sensor Thread Decides Fitment
The supplied temperature and pressure sensors use a Z 1/2 thread, which corresponds to a 1/2 NPT port on the engine block or cylinder head. If the engine does not have an available 1/2 NPT port, or if the builder cannot adapt to that thread size, the gauges cannot be installed without additional machining or adapters not provided in the kit.
Highlights
- Monitors engine vitals with three gauges in one kit
- Reads oil pressure from 0 to 100 psi for early warning
- Tracks coolant temperature from 100 to 280 degrees
- Shows electrical system health from 8V to 16V
- Illuminated chrome dials with red needles stay readable at night
Specifications
| Type | Instrument Clusters |
|---|---|
| Gauge Type | Oil Pressure |
Questions about this item
Should I pick the triple kit or buy the oil-pressure, volt and water-temp gauges separately?
The kit bundles all three 52 mm gauges with a single illuminated chrome housing and one installation kit, so you get matched styling and fewer parts to source.
What does the 0–100 psi oil-pressure reading tell me while the engine is running?
It shows live oil pressure in psi; idle will sit lower and pressure rises with RPM, letting you spot a drop before damage occurs.
The volt gauge reads 8–16 V — what does that range cover on a 12 V system?
It spans the normal charging window; below 12 V shows discharge, above 12 V shows alternator output, and anything near 16 V flags an over-charge condition.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
