Dyno Racing
Dyno Racing 52 mm Smoke Lens Water Temp Gauge 40-140 °C 1/8 NPT Sensor
A 52 mm water-temperature gauge reading 40 to 140 °C with a smoke lens, red LED needle, white LED display and included 1/8 NPT sensor
- TypeGauges
- Gauge TypeOil Temp
- Reads 40-140 °C for precise coolant monitoring
- 52 mm smoke lens stays subtle by day, bright LED at night
- Red illuminated needle gives instant at-a-glance reading
- 1/8 NPT sensor threads straight into standard ports
- ABS body with 52 cm wiring fits tight dash spaces
Dyno Racing 52 mm Water Temp Gauge
This 52 mm gauge monitors engine coolant temperature from 40 to 140 °C. It suits drivers who want a clear readout with a smoked lens that stays visible in bright daylight and at night.
Installation notes and common issues
The kit includes a 1/8 NPT sensor, mounting hardware and an English manual. Wiring runs 52 cm and draws a maximum of .3 A on both ignition and illumination circuits; professional fitting is advised to avoid leaks at the sensor thread.
Range and headroom
The Celsius display covers 40 to 140 °C, giving headroom above normal running temperatures. It will not suit applications that require a wider span or a Fahrenheit scale, and the single sensor input cannot support dual-readout setups.
Highlights
- Reads 40-140 °C for precise coolant monitoring
- 52 mm smoke lens stays subtle by day, bright LED at night
- Red illuminated needle gives instant at-a-glance reading
- 1/8 NPT sensor threads straight into standard ports
- ABS body with 52 cm wiring fits tight dash spaces
Specifications
| Type | Gauges |
|---|---|
| Gauge Type | Oil Temp |
Questions about this item
How can I confirm the gauge is reading correctly once it is wired to the 12 V ignition feed?
With the ignition on the needle should sweep and the super white LED backlight should illuminate; the sensor will then report coolant temperature from 40 to 140 °C.
What components are included and what must be sourced separately?
The box contains the 52 mm gauge, a 1/8 NPT water temperature sensor, English instructions and mounting hardware; a 12 V power source and suitable wiring are not supplied.
Which version should I choose if I need a 52 mm gauge that reads in Celsius up to 140 °C?
This single version has a 52 mm diameter, a 40–140 °C display range and a 1/8 NPT sensor, matching those requirements exactly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
