We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass pneumatic ball valve with silver actuator and black solenoid coil

Dynaquip Controls

Dynaquip Controls PHH2AATS065A 3 in Pneumatic Ball Valve Trap

SKU CH-ZH37-GTMEN MPN PHH2AATS065A

A pneumatically actuated brass ball valve with a 115 V AC pilot solenoid, full-port design and a 600 psi operating pressure limit

  • TypeDrain Components
  • Pneumatically actuated for automated flow control
  • Air-to-spring operation with fail-safe closed position
  • 115 V AC pilot solenoid included for direct wiring
  • Brass body withstands 600 psi operating pressure
  • Full-port design maintains unrestricted flow capacity

Pneumatically actuated 3 in ball valve

The Dynaquip Controls PHH2AATS065A is a brass pneumatic ball valve designed for inline flow control in industrial piping systems. It suits maintenance engineers and plant operators who need automated shut-off with a fail-closed safety position. The unit includes a 115V AC pilot solenoid for direct integration into existing control circuits. Full-port construction minimises pressure drop across the valve body.

Sustained pressure and steam ratings

Under continuous service the valve withstands up to 600 psi operating pressure and 150 psi steam pressure without degradation of the chrome-plated brass ball. The air-to-spring actuator maintains the normally closed state during extended idle periods and returns to that position automatically if supply air is lost. Brass body material resists corrosion in typical water, oil and compressed-air media over long duty cycles.

Installation checks before ordering

Verify that the pipeline uses 3 in FNPT connections to match the valve end fittings. Confirm that a clean, dry compressed-air source is available for the actuator and that control voltage matches the 115V AC solenoid rating. Ensure the straight valve body orientation fits the available piping layout and that the fail-closed behaviour aligns with your safety requirements.

Highlights

  • Pneumatically actuated for automated flow control
  • Air-to-spring operation with fail-safe closed position
  • 115 V AC pilot solenoid included for direct wiring
  • Brass body withstands 600 psi operating pressure
  • Full-port design maintains unrestricted flow capacity

Specifications

TypeDrain Components
BrandDynaquip Controls
ModelPHH2AATS065A

Questions about this item

How much heat or noise does the 600 psi brass valve generate when it cycles all day?

The pneumatic actuator uses compressed air rather than an electric motor, so it produces no electrical heat and only a brief exhaust hiss each stroke.

What supply pressure and pilot voltage must I already have on site for the 115 V AC solenoid to operate the valve?

You need a clean, dry compressed-air line rated for at least the valve’s 600 psi maximum and a 115 V AC control circuit to energise the included pilot solenoid.

Will the full-port 3 in body match the flow of my existing 3 in steel piping without creating a restriction?

Yes, the full-port chrome-plated brass ball provides an unobstructed bore that matches nominal 3 in pipe internal diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.