Dynaquip Controls
Dynaquip Controls EVA65AME21 1 in 600 psi 120V AC IP66 trap
Electrically actuated two-way ball valve with 316 stainless steel ball, 600 psi rating, 120 V AC operation and IP66 enclosure
- TypeDrain Components
- ColorTransparent
- Electrically actuated for remote flow control
- 600 psi rating handles high-pressure systems
- IP66 enclosure resists dust and water ingress
- 316 stainless steel ball resists corrosion
- 5-second cycle time enables fast response
Electrically Actuated 1 in Ball Valve
This electrically actuated two-way ball valve uses a 316 stainless-steel ball and PTFE seats to control fluid flow in industrial and commercial plumbing systems. It operates on 120V AC power and carries an IP66 rating for dust and water ingress protection. The straight-pattern, three-piece bronze body is rated for 600 psi maximum operating pressure.
Manual Override and Position Indicator
The actuator includes a manual override lever, a visual position indicator and built-in thermal overload protection. These features allow local operation during power loss, quick status checks and protection against motor overheating. The valve fails in its last position when power is removed.
2.5 Second 90 Degree Cycle Time
The actuator completes a full 90-degree stroke in 2.5 seconds, which determines how quickly the valve can open or close in automated sequences. This cycle time suits processes that require moderate actuation speed. Installers must verify that the system design accommodates this operating speed.
Highlights
- Electrically actuated for remote flow control
- 600 psi rating handles high-pressure systems
- IP66 enclosure resists dust and water ingress
- 316 stainless steel ball resists corrosion
- 5-second cycle time enables fast response
Specifications
| Type | Drain Components |
|---|---|
| Color | Transparent |
| Brand | Dynaquip Controls |
| Model | EVA65AME21 |
Questions about this item
What maintenance will the PTFE seats and FKM seals need over time?
PTFE seats and FKM seals resist wear but should be inspected periodically for chemical attack or deformation, especially after exposure to aggressive fluids at the 600 psi rating.
Which limit appears first during continuous cycling — thermal overload or pressure rating?
Thermal overload protection in the actuator trips before the 600 psi body limit is reached during rapid, repeated 90-degree cycles.
How much heat and noise does the 120V AC actuator produce when running all day?
The actuator draws modest AC power, runs at IP66 without a fan, and emits only a quiet motor hum during each 2.5-second stroke.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



