We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare projector lamp module with metal housing and glass bulb

DynamicLamps

DynamicLamps POA-LMP36 Projector Accessory

SKU CH-9KG3-0C2DF

Replacement bare lamp compatible with Eiki LC-SM3, LC-SM4, LC-XM2 and LC-XM3 projectors

  • TypeProjector Lamp
  • OEM bare lamp matches original projector specifications
  • Compatible with LC-SM3, LC-SM4, LC-XM2 and LC-XM3 models
  • Replaces part numbers 6102938210, POA-LMP36 and 610-293-8210
  • New condition ensures full brightness from first use
  • Bare lamp design allows direct installation without extra housing

Eiki POA-LMP36 Replacement Lamp

This bare lamp module is built to the original equipment specification for Eiki projectors. It fits the LC-SM3, LC-SM4, LC-XM2 and LC-XM3 models directly. Installers and IT teams can swap the lamp without replacing the surrounding housing. The part restores full brightness when the original lamp reaches end of life.

OEM Bare Lamp Format

The package contains only the lamp burner and reflector assembly inside a minimal frame. Existing projector housings are reused, which reduces electronic waste and lowers the cost per replacement. No additional cables, filters or tools are bundled with the unit. Users must transfer the old housing hardware during installation.

Projector-Specific Compatibility

The lamp matches part numbers 610 293 8210 and POA-LMP36 across the listed Eiki models. Correct alignment depends on the projector's original housing geometry, so the module is not interchangeable with other brands. Buyers needing a complete housing assembly or a different wattage rating should verify the exact projector model before ordering.

Highlights

  • OEM bare lamp matches original projector specifications
  • Compatible with LC-SM3, LC-SM4, LC-XM2 and LC-XM3 models
  • Replaces part numbers 6102938210, POA-LMP36 and 610-293-8210
  • New condition ensures full brightness from first use
  • Bare lamp design allows direct installation without extra housing

Specifications

TypeProjector Lamp

Questions about this item

How often will the POA-LMP36 bare lamp need replacement under normal use?

The POA-LMP36 is a bare lamp module; replacement interval depends on the projector model and its lamp-hour rating, which is set by the projector firmware rather than the lamp itself.

What limit appears first when the lamp runs continuously in an LC-SM3 or LC-XM2 projector?

The projector’s built-in lamp-hour counter will trigger a replacement warning once the rated hours are reached, which is the first hard limit during sustained operation.

Does the bare lamp add noticeable fan noise or heat when the projector runs all day?

The POA-LMP36 contains no fan; any noise or heat comes from the projector’s own cooling system, which is unchanged by fitting this OEM lamp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.