We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular projector lamp module in black plastic housing with exposed bulb and connector

DynamicLamps

DynamicLamps ELPLP93 Compatible Projector Lamp Module

SKU CH-DW6X-B7FXR

Compatible replacement lamp module for Epson ELPLP93 projectors including Pro G7000W, G7100, G7200W, G7400U, G7500U, G7805 and G7905U series

  • TypeProjector Lamp
  • Compatible with Epson ELPLP93 part numbers
  • Fits PowerLite Pro G7000W series projectors
  • Works with EB-G7100 and G7100NL models
  • Suitable for G7200W and G7400U units
  • Replaces lamps in G7500U and G7805 projectors

Compatible ELPLP93 Lamp Module

The DynamicLamps ELPLP93 is a compatible replacement projector lamp module designed for Epson PowerLite Pro G series projectors. It restores original brightness when the installed lamp reaches end of life. Installation follows the projector's standard lamp replacement procedure.

Replaces Original ELPLP93 Unit

This module replaces the OEM ELPLP93 lamp assembly used in models such as the G7000W, G7100, G7200W, G7400U, G7500U, G7800, G7805 and G7900U series. The jump is worth it when the projector warns of lamp expiry or image dimming becomes noticeable during presentations.

Rated For Standard Projector Duty

The lamp provides illumination for typical business and education projection cycles. It handles daily classroom or meeting-room use within the projector's specified operating hours. Runtime decreases if the projector runs continuously in high-brightness modes or in dusty environments without filter maintenance.

Highlights

  • Compatible with Epson ELPLP93 part numbers
  • Fits PowerLite Pro G7000W series projectors
  • Works with EB-G7100 and G7100NL models
  • Suitable for G7200W and G7400U units
  • Replaces lamps in G7500U and G7805 projectors

Specifications

TypeProjector Lamp

Questions about this item

Which Epson projector models accept the ELPLP93 lamp module?

The ELPLP93 fits Epson Pro G7000W, G7100, G7200W, G7400U, G7500U, G7800, G7805, G7900U and G7905U series projectors.

What is the correct way to install the ELPLP93 module?

Power off and unplug the projector, let it cool, remove the lamp cover, loosen the securing screws, pull the old module straight out, insert the new ELPLP93 until it seats firmly, tighten the screws, replace the cover and reset the lamp timer in the menu.

When should the ELPLP93 lamp be replaced?

Replace the ELPLP93 when the projector displays a lamp-replacement warning, brightness drops noticeably, or the lamp-hour counter approaches the rated service interval.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.