Dynabrade Products
Dynabrade Products 59029 Dynorbital-Spirit Air Random Orbital Sander 0.25HP 6 In
A 6-inch random orbital sander with a 3/16-inch orbit, 0.25 hp motor and 12,000 RPM free speed for industrial finishing
- MaterialHAWA
- 25 hp motor delivers 12,000 rpm free speed for fast material removal
- 3/16 in orbit diameter produces a smooth, swirl-free finish on wood or metal
- 5 cfm average air consumption keeps compressor demand low during extended use
- Palm-grip body with lever throttle gives precise one-hand control over sanding pressure
- Rear exhaust directs airflow away from the work surface for a cleaner shop environment
Professional Air Random Orbital Sander
The Dynabrade 59029 Dynorbital-Spirit is a palm-style air tool built for industrial surface preparation. It delivers a 0.25 hp motor driving a 6 in pad at 12 000 RPM free speed. Technicians use it for consistent material removal on metal, composite or wood substrates in production environments.
3/16 in Orbit Diameter Defines the Cut
The fixed 3/16 in orbit diameter balances aggressive stock removal with a fine finish quality. This single specification determines whether the tool matches the surface profile you require. A larger orbit cuts faster but leaves a coarser pattern; a smaller orbit polishes but removes less material per pass.
Connects to 1/4 in NPT Air Supply
The sander requires a 90 psi supply delivering at least 3.5 cfm average flow through a minimum 1/4 in hose. Rear exhaust directs air away from the work area and the operator. The 5/16 in -24 spindle accepts standard vinyl or hook-face pads, letting you switch abrasive media without additional adapters.
Highlights
- 25 hp motor delivers 12,000 rpm free speed for fast material removal
- 3/16 in orbit diameter produces a smooth, swirl-free finish on wood or metal
- 5 cfm average air consumption keeps compressor demand low during extended use
- Palm-grip body with lever throttle gives precise one-hand control over sanding pressure
- Rear exhaust directs airflow away from the work surface for a cleaner shop environment
Specifications
| Brand | DYNABRADE |
|---|---|
| Material | HAWA |
Questions about this item
How much material will the 3/16 in orbit remove on a real job?
The 3/16 in orbit diameter gives a medium cut that balances stock removal with finish quality on wood, metal or composite surfaces.
What does the 14 cfm full-load figure mean for my compressor?
Your compressor must deliver 14 cfm continuously at 90 psi; the 3.5 cfm average is only for short 15-second bursts.
Will the 5/16 in-24 spindle accept my existing 6 in pads?
Yes, the 5/16 in-24 thread is the standard mount for 6 in vinyl or hook-face pads on this sander.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
