We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dynabrade 15013 pneumatic belt sander, aluminum body, rubber grip, 13-inch belt track, rear exhaust, safety lever throttle

Dynabrade Products

Dynabrade 15013 0.4 HP Abrasive Belt Tool 13"L

SKU CH-BCAD-V48EE

A 0.4 HP pneumatic belt tool with 13 inch belt length, 25,000 rpm free speed and rear exhaust for general machine shop use

  • Compact 12 in. overall length suits tight work areas
  • 4 HP motor delivers 25,000 rpm free speed for fast material removal
  • Accepts 1/8–1/2 in. wide by 13 in. long belts for versatile sanding
  • Lever throttle with safety lock prevents accidental start-up
  • Rear exhaust directs air away from the workpiece and operator

0.4 HP abrasive belt tool for metal finishing

The Dynabrade 15013 is a pneumatic abrasive belt tool rated at 0.4 horsepower for general-duty metal finishing and deburring tasks. It accepts belts from 1/8 inch to 1/2 inch wide and 13 inches long, driven at a free speed of 25,000 rpm. The aluminium housing and rubber handle provide a lightweight, controlled grip for detail work in machine shops and automotive bays.

Rear exhaust with 3.0 CFM air consumption at 90 psig

Compressed air enters through a 1/4 inch NPT inlet and requires a minimum 1/4 inch hose at 90 psig operating pressure. Average consumption is 3.00 CFM measured over a 15-second run and 3.0 CFM at full load. The rear exhaust directs airflow away from the workpiece and operator, reducing dust dispersal and noise at the point of contact.

Lever throttle with safety lock prevents

The lever throttle incorporates a safety lock that must be disengaged before the tool can run, reducing unintended activation during belt changes or repositioning. A model 15035 contact arm is included for immediate setup. The 12-inch overall length keeps the tool manoeuvrable in tight cavities where larger sanders cannot reach.

Highlights

  • Compact 12 in. overall length suits tight work areas
  • 4 HP motor delivers 25,000 rpm free speed for fast material removal
  • Accepts 1/8–1/2 in. wide by 13 in. long belts for versatile sanding
  • Lever throttle with safety lock prevents accidental start-up
  • Rear exhaust directs air away from the workpiece and operator

Specifications

BrandDynabrade

Questions about this item

How do I install the 15035 contact arm and what step is often missed?

Connect the 1/4 in. NPT air inlet to a 1/4 in. minimum hose at 90 psig. The step often missed is verifying 3.0 CFM at full load before starting.

What maintenance will this 0.4 HP abrasive belt tool need over time?

Replace abrasive belts sized 1/8 in. to 1/2 in. wide by 13 in. long as they wear. Lubricate the air motor periodically and check the rear exhaust for blockage.

What limit appears first during sustained use at 25,000 rpm?

The 3.0 CFM air demand at full load is the first limit. If the compressor cannot maintain 90 psig continuously, speed and cutting power will drop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.