We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic belt sander with composite housing and lever throttle, 11 inches long

DYNABRADE

DYNABRADE 11605 Air Belt Sander 0.7 hp 1 in x 18 in Belt 20000 RPM

SKU CH-SE7S-MWKZY MPN 11605

Industrial-duty pneumatic belt sander with 0.7 hp motor, 1 x 18 in belt and 20,000 RPM free speed for rapid material removal

  • Delivers industrial power with 0.7 hp motor
  • Reaches 20000 RPM free speed for rapid material removal
  • Variable speed control matches belt speed to the task
  • Composite handle and housing reduce vibration during extended use
  • Includes Dynapad platen pad and 14266 contact arm for immediate setup

Industrial Air Belt Sander 0.7 hp

The DYNABRADE 11605 is a pneumatic belt sander built for industrial material removal and finishing. It runs on compressed air at 90 psi and delivers 0.7 hp through a 1 in by 18 in belt at 20,000 RPM free speed. The composite housing and handle reduce vibration during extended use. A lever throttle provides variable speed control for precise work.

1 in x 18 in Belt Capacity and Air Demand

The 1 in wide by 18 in long belt suits narrow workpieces, edges and inside curves where wider belts cannot reach. Average air consumption is 9.0 CFM during a 15 second run, rising to 36.0 CFM at full load, so a compressor with adequate reserve is essential. The 1/4 in NPT inlet requires a minimum 3/8 in hose to maintain flow. Front exhaust directs air away from the workpiece surface.

Upgrade from Smaller Air Files and Hand Sanding

This sander replaces small air files and manual sanding blocks when stock removal speed and consistency matter on metal, composite or wood. The jump is worth it for shops running repetitive deburring, blending or finishing tasks that exceed the duty cycle of lighter tools. It is not suited for wide surface flattening or heavy material hogging beyond the 1 in belt width. The included 11605 Dynapad platen and 14266 contact arm cover standard flat and contour work.

Highlights

  • Delivers industrial power with 0.7 hp motor
  • Reaches 20000 RPM free speed for rapid material removal
  • Variable speed control matches belt speed to the task
  • Composite handle and housing reduce vibration during extended use
  • Includes Dynapad platen pad and 14266 contact arm for immediate setup

Specifications

BrandDYNABRADE

Questions about this item

Will the 1 in x 18 in belt and 0.7 hp motor run on my existing 3/8 in hose at 90 psi?

Yes, the sander needs a minimum 3/8 in hose and 90 psi supply; at those settings it draws 9.0 CFM average and 36.0 CFM at full load.

How do I confirm the variable-speed lever and front exhaust are working right after hookup?

Squeeze the lever throttle — speed should rise smoothly to 20000 RPM — and feel air exiting the front exhaust port while the belt runs.

Does the box include the Model 11605 Dynapad platen pad and Model 14266 contact arm, or must I buy them separately?

Both the Model 11605 Hand/Cork Dynapad Platen Pad and the Model 14266 Contact Arm are included with the sander.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.