dwndpump DP3 Electric SUP Pump 20 PSI 400 L/min 2600 mAh
Rechargeable electric pump inflates a 10.5' SUP to 15 PSI in 7 minutes with auto-off at 20 PSI
- Inlet SizeElectric SUP Pump*1, 39.36inch Hose*1, Type-C Cable*1, Manua
- Outlet SizeElectric SUP Pump*1, 39.36inch Hose*1, Type-C Cable*1, Manua
- MaterialPlastic
- Maximum GPM400 liters_per_minute
- Compatibility/FitmentD16PRO, dwndpump
- Frequency Hznot_applicable
- Inflates a 10.5' board to 15 PSI in 7 minutes
- Dual-stage pump delivers 400 L/min then 100 L/min at 20 PSI max
- Built-in 2600 mAh battery powers two full inflations per charge
- Compact 7.64 x 6.89 x 3.46 in design weighs 2.51 lb with carry handle
- Includes 7 valve adapters for SUPs, kayaks, wind wings and tents
Portable Electric SUP Pump
The dwndpump DP3 is a battery-powered air pump built for stand-up paddle boards and similar inflatables. Its integrated 2600 mAh lithium-polymer pack delivers cordless operation so you can inflate at the water’s edge without a mains socket. A built-in LED display lets you set a target pressure and the pump stops automatically when that level is reached.
Ideal for occasional paddlers, not daily fleets
Solo paddlers and weekend kayakers who value grab-and-go convenience will appreciate the light 2.51 lb weight and carry handle. Rental operators or anyone needing to inflate dozens of boards in a session should look elsewhere because the single-battery capacity is rated for roughly two 10.5 ft boards at 15 PSI before a recharge is required.
Dual-stage flow up to 400 L/min
The pump moves high-volume air at up to 400 L/min, then switches to a 100 L/min high-pressure stage to reach a maximum of 20 PSI. This two-speed behaviour is the specification that determines whether the unit can meet your board’s pressure target in the time you have available.
Highlights
- Inflates a 10.5' board to 15 PSI in 7 minutes
- Dual-stage pump delivers 400 L/min then 100 L/min at 20 PSI max
- Built-in 2600 mAh battery powers two full inflations per charge
- Compact 7.64 x 6.89 x 3.46 in design weighs 2.51 lb with carry handle
- Includes 7 valve adapters for SUPs, kayaks, wind wings and tents
Specifications
| Inlet Size | Electric SUP Pump*1, 39.36inch Hose*1, Type-C Cable*1, Manual*1, Valve Adapters*7 |
|---|---|
| Outlet Size | Electric SUP Pump*1, 39.36inch Hose*1, Type-C Cable*1, Manual*1, Valve Adapters*7 |
| Material | Plastic |
| Maximum GPM | 400 liters_per_minute |
| Compatibility/Fitment | D16PRO, dwndpump |
| Frequency Hz | not_applicable |
| Current Type | Battery Powered, a, lithium_polymer |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Size/Dimensions | 15.3924 cm x 18.5928 cm x 19.6088 cm |
| Item Count | 12 pack |
| Parts | 2 year guarantee |
| Labor | 2 year guarantee |
| Brand | dwndpump |
| Model | DP3 |
| Part Number | D16PRO |
Questions about this item
How many PSI does the DP3 pump reach and at what flow rate does it switch modes?
The DP3 pump reaches 20 PSI and automatically switches from 400 L/min high-flow mode to 100 L/min high-pressure mode during inflation.
What are the exact dimensions and weight of the DP3 pump?
The DP3 pump measures 7.64 x 6.89 x 3.46 inches and weighs 2.51 lb, making it portable with a built-in handle.
How do I charge the DP3 pump before first use and what adapter is required?
Fully charge the built-in 2600 mAh battery using a 5V/2A or higher USB-C adapter before first use; no charging plug is included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



