We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim transmitter and receiver set with four-port USB hub on receiver, Cat 5e/6 link up to 165 ft

DVDO, Inc.

DVDO, Inc. USB 2.0 Extender over Ethernet 165 ft 4-Port Hub

SKU CH-NZA9-Y2K00

Extends USB 2.0 signals up to 165 feet over Cat 5e/6 cable and provides a four-port hub at the receiver end

  • Extends USB 2.0 signals up to 165 feet over Cat 5e/6 cable for flexible device placement
  • Built-in 4-port USB 2.0 hub on receiver connects multiple peripherals from a single host
  • Works with USB 1.1 and 1.0 devices for broad legacy compatibility
  • ESD protection rated at +/- 8 kV air-gap and +/- 4 kV contact discharge safeguards equipment
  • Plug-and-play setup with transmitter, receiver, USB-A to USB-B cable and power supply included

USB 2.0 Extension Kit for Remote Devices

This DVDO extender set carries USB 2.0 signals up to 165 feet over a single Cat 5e or Cat 6 cable. A slim transmitter connects to the host computer while the receiver provides a four-port hub for keyboards, mice, webcams or other peripherals. The link is backward compatible with USB 1.1 and USB 1.0 devices. No driver installation is required for operation.

Suited for Long-Run Peripheral Placement

The kit serves installers who need USB devices far from the host, such as conference-room cameras, digital-signage players or industrial sensors. It supports only USB 2.0 speeds, so users who require USB 3.0 or higher bandwidth should look at a different solution. Buyers who want more than four ports at the remote end will also need another approach. Power for the transmitter is drawn from the host USB port.

Maximum Reach 165 Feet Over Cat 5e/6

The single specification that decides fit is the 165-foot (50-meter) extension distance over standard Ethernet cable. If the cable run between host and devices exceeds this length, the extender will not function reliably. Conversely, runs within this limit gain full USB 2.0 connectivity without additional repeaters. The built-in ESD protection rated at +/- 8 kV air-gap and +/- 4 kV contact discharge helps maintain signal integrity across that distance.

Highlights

  • Extends USB 2.0 signals up to 165 feet over Cat 5e/6 cable for flexible device placement
  • Built-in 4-port USB 2.0 hub on receiver connects multiple peripherals from a single host
  • Works with USB 1.1 and 1.0 devices for broad legacy compatibility
  • ESD protection rated at +/- 8 kV air-gap and +/- 4 kV contact discharge safeguards equipment
  • Plug-and-play setup with transmitter, receiver, USB-A to USB-B cable and power supply included

Specifications

No published specifications for this item yet.

Questions about this item

What cables and accessories come in the box and what must I add?

The kit includes a transmitter, a receiver with a four-port USB 2.0 hub, a USB-A to USB-B cable and a power supply; you only need to supply a Cat 5e or Cat 6 Ethernet cable up to 165 ft.

Should I choose this model or a different capacity for my setup?

This extender provides a single host connection and a four-port hub at the remote end, so it suits one computer driving up to four USB 2.0 devices.

What does the 165 ft range mean when the extender is installed in my office?

You can place the receiver and its four USB ports up to 165 ft from the host computer over a single Cat 5e/6 cable while maintaining USB 2.0 speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in KVM Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.