DupliM Inc
DupliM Inc 140101 1:11 SATA Duplicator 11 targets 12 sanitize 120 MB/s 1536 MB buffer
Standalone tower copies 11 SATA or IDE drives at once and sanitises 12 with DoD 7-pass, 120 MB/s transfer and 1536 MB buffer
- Operating TypeStandalone
- Copies 11 drives at once for rapid deployment
- Sanitizes 12 drives simultaneously with DoD 7-pass
- Standalone operation needs no host computer
- Transfers data up to 120 MB/s via SATA
- 1536 MB buffer keeps large jobs flowing
1:11 SATA duplicator for high-volume deployment
The DupliM 140101 copies one source drive to eleven targets simultaneously and can sanitize twelve drives at once. It operates as a standalone tower, so no host computer is required during duplication or wiping. The unit accepts 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE drives, with optional adapters for 2.5 inch IDE media. Maximum supported capacity exceeds 8TB per drive.
Thermals noise and power in normal operation
The duplicator runs on mains power and uses internal cooling fans to manage heat during extended copy or sanitize sessions. Transfer rates reach 120 MB/s per channel, keeping overall power draw steady while the 1536 MB buffer smooths data flow across all active ports. Noise levels remain consistent with typical office equipment during sustained workloads.
Build quality and connector layout for daily use
A tower chassis provides vertical drive bays that simplify loading and unloading without tools. SATA and IDE connectors are keyed to prevent misalignment, and the front-panel interface displays progress for each port independently. The standalone design means deployment only requires a power outlet and the drives themselves.
Highlights
- Copies 11 drives at once for rapid deployment
- Sanitizes 12 drives simultaneously with DoD 7-pass
- Standalone operation needs no host computer
- Transfers data up to 120 MB/s via SATA
- 1536 MB buffer keeps large jobs flowing
Specifications
| Operating Type | Standalone |
|---|---|
| Shipping weight | 21.77 kg |
| Package size | 762 × 533 × 305 mm |
Questions about this item
How do I install the source and target drives in the 1:11 duplicator tower?
Insert the source SATA or IDE drive into the top slot and up to 11 target drives into the lower bays, then press the copy button; the step often missed is confirming every target shows ready before starting.
Which parts of the DupliM 140101 will need replacement after heavy use?
The SATA and IDE drive connectors and the cooling fans are the components most likely to wear out during repeated high-volume duplication cycles.
What limit appears first when running continuous 120 MB/s copies on all 11 targets?
The 1536 MB buffer fills first, causing the duplicator to throttle the transfer rate until the buffer clears.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
