We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall tower duplicator with five SATA drive bays on the front

DupliM Inc

DupliM Inc 1:5 SSD HDD Duplicator Tower SATA 300MB/s

SKU CH-JP6G-0N1MW

Stand-alone tower duplicates up to five 2.5 or 3.5 SATA drives at 300 MB/s and sanitizes six drives with multiple overwrite methods

  • Target1 to 5
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Clone five drives at once with 300 MB/s SATA speed
  • Sanitise six drives simultaneously using DoD 7-pass overwrite
  • Stand-alone tower needs no host computer
  • Supports 2.5 and 3.5 inch SATA HDDs and SSDs
  • Handles 3.5 inch IDE drives for legacy media

1-to-5 SATA duplicator tower

The DupliM Inc 1:5 tower duplicates up to five SATA or IDE drives at once in a standalone workflow. IT departments and data centres use it for mass deployment or secure erasure without tying up a host PC. The unit handles 2.5 and 3.5 inch SATA SSDs and HDDs plus 3.5 inch IDE drives. Maximum supported capacity exceeds 8 TB per bay.

Standalone thermal and power profile

The tower runs without a host computer so heat and noise stay local to the chassis during long copy or sanitise jobs. Transfer rate reaches 300 MB/s over SATA while all five targets operate simultaneously. No external software or driver load adds to system power draw during operation.

Tower build and daily connectivity

A vertical tower form factor keeps drive bays accessible for quick swap cycles in rack or bench environments. Bays accept mixed 2.5 and 3.5 inch SATA devices alongside 3.5 inch IDE drives with optional adapters. Sanitisation modes include 1-Pass, 3-Pass, Secure Erase and DoD 7-Pass for up to six drives at once.

Highlights

  • Clone five drives at once with 300 MB/s SATA speed
  • Sanitise six drives simultaneously using DoD 7-pass overwrite
  • Stand-alone tower needs no host computer
  • Supports 2.5 and 3.5 inch SATA HDDs and SSDs
  • Handles 3.5 inch IDE drives for legacy media

Specifications

Target1 to 5
Data Transfer Rate300MB/s
Operating TypeStandalone

Questions about this item

How do I install a 3.5" IDE drive into the tower and what step is often missed?

Connect the 3.5" IDE drive to the rear IDE port using a 40-pin cable and set the jumper to Master; the step often missed is confirming the Master jumper before powering on.

What maintenance will the duplicator need after extended use?

The unit has no user-serviceable parts; keep the ventilation slots clear of dust and verify the power cable is secure to maintain the 300MB/s transfer rate.

What limit appears first when running five simultaneous copy jobs for hours?

Sustained 300MB/s transfers across five targets generate heat; the tower’s thermal limit will throttle speeds before any drive capacity limit is reached.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.