MediaPack4All 12.5mm Blu-Ray Case Multi-Three Storing Capacity
- 2.4892 L x 18.2118…
- 1 Year Warranty
$13.99
0.00016586BTC
In stock
DupliM Inc
DupliM Inc 1:5 SATA Duplicator 5 Targets 6 Sanitize 120MB/s 768MB Buffer
Standalone SATA duplicator clones five drives at once up to 120 MB/s and sanitises six with DoD 5220/22-M wipe
- Operating TypeStandalone
- Creates five simultaneous clones at 120 MB/s
- Sanitizes six drives with DoD 5220/22-M seven-pass wipe
- Standalone operation requires no host computer
- 768 MB buffer sustains high-speed transfers
- Supports 3.5″ SATA drives and 2.5″ with adapters
Industrial standalone duplicator
The DupliM 1:5 tower creates five simultaneous SATA drive clones without a host computer. IT departments and data centres use it for mass deployment or forensic imaging where network bandwidth is unavailable.
120 MB/s transfer ceiling
Sector-by-sector copying runs at up to 120 MB/s across all five targets, so total throughput scales with the slowest drive. A 768 MB buffer absorbs burst variance and keeps the pipeline full during sustained writes.
Eight-terabyte-plus headroom
Drives larger than 8 TB are supported, letting the unit handle current high-capacity SATA HDDs and SSDs. Sanitization covers six drives at once with one-pass, three-pass verify or DoD 5220/22-M seven-pass overwrite, but 2.5-inch drives need separate adapters not supplied.
Highlights
- Creates five simultaneous clones at 120 MB/s
- Sanitizes six drives with DoD 5220/22-M seven-pass wipe
- Standalone operation requires no host computer
- 768 MB buffer sustains high-speed transfers
- Supports 3.5″ SATA drives and 2.5″ with adapters
Specifications
| Operating Type | Standalone |
|---|
Questions about this item
What does the 120 MB/s transfer rate mean when the duplicator is running five targets at once?
The 120 MB/s figure is the maximum SATA bus speed; each of the five target drives can receive data at up to that rate simultaneously because the unit has a 768 MB buffer to sustain parallel streams.
Which SATA standard does the duplicator use and what practical limit does it impose?
It uses the SATA interface capped at 120 MB/s, so no single drive can exceed that throughput regardless of the drive's own rated speed.
What drive sizes fit the duplicator and are adapters included?
The bays accept 3.5" SATA drives directly; 2.5" SATA drives require optional adapters (part number 450100) which are not included.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
