We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall black tower duplicator with 31 USB target slots and LCD panel

DupliM Inc

DupliM Inc 1:31 USB Copy Tower 31-Target Duplicator

SKU CH-FRF5-PEJRZ

Standalone duplicator copies one source to 31 USB flash drives or 2.5-inch USB hard drives and SSDs at up to 1.5 GB per minute with 256 MB buffer and multi-pass sanitisation

  • Operating TypeStandalone
  • Duplicates up to 31 USB flash drives simultaneously
  • Copies external 2.5-inch USB HDD and SSD drives
  • Sanitises drives with 1-pass, 3-pass and 7-pass overwrite
  • Operates standalone via back-lit LCD interface
  • Reads and writes at up to 1.5 GB per minute

DupliM 1:31 USB Copy Tower

The DupliM 1:31 USB Copy Tower is a standalone duplicator that copies one source drive to as many as 31 USB flash drives or external 2.5-inch USB hard drives and SSDs. It operates without a host computer and uses a back-lit LCD interface for control.

For high-volume USB duplication and sanitisation

Teams that need to clone dozens of USB sticks or 2.5-inch USB drives in a single session will benefit from the 31-target capacity and asynchronous duplication. Buyers who require duplication of internal drives, 3.5-inch drives or more than 31 targets at once should look at a different solution.

31-target asynchronous duplication

The single specification that decides fit is the ability to duplicate up to 31 target devices simultaneously in asynchronous mode, with a maximum supported drive capacity of 2TB and transfer speeds up to 1.5GB per minute.

Highlights

  • Duplicates up to 31 USB flash drives simultaneously
  • Copies external 2.5-inch USB HDD and SSD drives
  • Sanitises drives with 1-pass, 3-pass and 7-pass overwrite
  • Operates standalone via back-lit LCD interface
  • Reads and writes at up to 1.5 GB per minute

Specifications

Operating TypeStandalone

Questions about this item

How do I install the DupliM 1:31 USB Copy Tower and what step do users often miss?

Place the unit on a stable surface, connect the power cable, insert the source drive into the dedicated source port, then insert up to 31 target drives into the numbered slots. The step often missed is verifying each target drive shows a solid connection light before starting the copy job.

What maintenance or replacement will the DupliM 1:31 USB Copy Tower need over time?

The USB port springs and slot guides wear after thousands of insertions; expect to replace the port board if drives stop seating firmly. The internal 256 MB buffer memory is soldered and not user-serviceable, so no memory upgrades are possible.

What limit appears first during sustained duplication on the DupliM 1:31 USB Copy Tower?

The 1.5 GB per minute write speed ceiling is reached before the 256 MB buffer fills, so sustained runs are paced by the USB 2.0/3.0 interface throughput rather than memory capacity.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.