We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower duplicator with four optical drives and front card slots

DupliM Inc

DupliM Inc 1:3 DVD CD Flash Copy Tower Duplicator

SKU CH-D99X-NEKPE

Standalone tower copies flash cards and USB drives directly to three DVD or CD burners at up to 24× DVD and 48× CD speeds

  • Operating TypeStandalone
  • Standalone operation copies flash to disc without a PC
  • 1:3 duplication produces three DVDs or CDs simultaneously
  • 128 MB buffer sustains 24× DVD and 48× CD write speeds
  • Disc spanning spreads 16 GB cards across four drives
  • Switchable 115–230 VAC power suits global voltage standards

Standalone 1:3 tower duplicator

The DupliM Inc 1:3 DVD CD Flash Copy Tower is a standalone duplicator that copies flash memory cards and USB flash drives directly to three DVD or CD writers without a computer. It targets photographers and forensics professionals who need to archive volatile media onto non-erasable optical discs while preserving date and time metadata.

Flash-to-disc archiving replaces PC workflows

It replaces a computer-based copy step by reading MS, CF, SD, MMC and USB 1.1 or 2.0 flash drives and writing the content to DVD±R, DVD±RW, dual-layer DVD±R or CD-R/RW media in a single operation. The jump is worth it when you must duplicate full 16 GB cards across four drives using disc spanning and want a dedicated appliance that keeps original timestamps intact.

Three writers at 24x DVD and 48x CD

Three drives write DVD±R at 24x, dual-layer DVD±R at 8x, DVD+RW at 8x, DVD-RW at 6x, CD-R at 48x and CD-RW at 32x, fed by a 128 MB buffer. The unit handles high-volume flash-to-disc batches but cannot write Blu-ray media and has no network or computer-connected mode.

Highlights

  • Standalone operation copies flash to disc without a PC
  • 1:3 duplication produces three DVDs or CDs simultaneously
  • 128 MB buffer sustains 24× DVD and 48× CD write speeds
  • Disc spanning spreads 16 GB cards across four drives
  • Switchable 115–230 VAC power suits global voltage standards

Specifications

Operating TypeStandalone

Questions about this item

What rack space or clearance does the 1:3 tower duplicator need for its three target drives?

The standalone tower houses one source and three target drives in a vertical stack; allow enough depth for the front-loading trays to open fully and rear ventilation space for the 115-230 VAC switchable power supply.

How do I start a copy job from a USB 2.0 flash drive to the three DVD±R targets, and what step is often missed?

Insert the USB 1.1/2.0 flash drive into the front port, load blank discs into all three target trays, then press the Copy button; the missed step is confirming the source is recognised before closing the trays.

When should the 128 MB buffer memory be cleared or the drive firmware updated for reliable 24X DVD±R burns?

The 128 MB buffer is volatile and clears automatically on power-off; firmware updates are only needed if new media types such as 8x dual-layer DVD±R fail to verify after burning.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.