We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A tower duplicator with eleven SATA drive slots and a control panel

DupliM Inc

DupliM Inc 1:11 SATA/IDE Duplicator Sanitizer 11 Targets 12 Sanitize 300MB/s

SKU CH-WJ0J-G30JZ

Copies up to 11 SATA or IDE drives simultaneously and sanitises up to 12 drives at once with transfer rates up to 300 MB/s

  • Target1 to 11
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Copies 11 drives simultaneously with 300 MB/s SATA speed
  • Sanitizes 12 drives at once using DoD 7-pass wipe
  • Verified destruction meets NIST 800-88 sanitization guidelines
  • Supports 2.5 and 3.5 inch SATA SSDs and HDDs
  • Stand-alone tower needs no host computer to operate

High-Capacity Tower Duplicator

The DupliM Inc 1:11 is a stand-alone tower duplicator and sanitizer built for IT departments and data centres that need to replicate or erase large batches of drives without tying up a host PC. It accepts up to eleven target drives simultaneously and can sanitize twelve drives at once, making it suited for high-volume deployment or secure retirement workflows.

Drive Compatibility Check

Before ordering, verify that your source and target drives use the SATA interface or are 3.5-inch IDE models, as these are the only natively supported formats. The unit handles 2.5-inch and 3.5-inch SATA HDDs and SSDs, plus 3.5-inch IDE HDDs, with a maximum capacity exceeding 8TB per drive. Drives requiring other interfaces or 2.5-inch IDE media need optional adapters not supplied with the duplicator.

Tower Build and Daily Use

The tower chassis provides vertical drive bays that keep cables organised and allow hot-swap insertion for continuous operation. SATA connectors support transfer rates up to 300 MB/s, so large images move quickly across all eleven targets. Sanitization options include 1-Pass, 3-Pass, Secure Erase and DoD 7-Pass overwrite, the last verified to meet NIST 800-88 guidelines for permanent data destruction.

Highlights

  • Copies 11 drives simultaneously with 300 MB/s SATA speed
  • Sanitizes 12 drives at once using DoD 7-pass wipe
  • Verified destruction meets NIST 800-88 sanitization guidelines
  • Supports 2.5 and 3.5 inch SATA SSDs and HDDs
  • Stand-alone tower needs no host computer to operate

Specifications

Target1 to 11
Data Transfer Rate300MB/s
Operating TypeStandalone

Questions about this item

What comes in the box with the DupliM 1:11 tower and do I need extra adapters for 2.5 inch IDE drives?

The duplicator ships as a standalone tower ready for 3.5 inch IDE, 3.5 inch and 2.5 inch SATA HDDs and SSDs; 2.5 inch IDE drives require optional adapters that are sold separately.

Should I choose the 11-target copy mode or the 12-target sanitize mode for my workflow?

Use the 11-target copy mode when you need to duplicate one source onto up to eleven SATA or IDE drives at once; switch to the 12-target sanitize mode when you must wipe up to twelve drives simultaneously using 1-Pass, 3-Pass, Secure Erase or DoD 7-Pass overwrite.

What does the 300 MB/s transfer rate mean when the tower is copying eleven drives at the same time?

The 300 MB/s SATA rate is the peak per-port speed; actual throughput per drive depends on the slowest drive in the batch, so eleven drives copy in parallel at each drive's own maximum up to that ceiling.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.