DupliM Inc
DupliM Inc 1:11 SATA Duplicator Sanitizer 11 Targets 12 Wipes
Standalone SATA duplicator clones 11 drives at once and sanitizes 12 drives with DoD 5220 seven-pass wipe
- Operating TypeStandalone
- Clones eleven drives at once for rapid deployment
- Sanitises twelve drives simultaneously with DoD 5220 seven-pass wipe
- Standalone operation needs no host PC to run
- Copies up to 120 MB/s with 1536 MB buffer
- Supports 3.5" SATA drives and 2.5" with adapters
Standalone SATA duplicator for IT departments
The DupliM 1:11 is a standalone tower that copies one source SATA drive to eleven targets at once. It also sanitizes up to twelve drives simultaneously using Secure Erase or three overwrite methods, including a DoD 5220/22-M seven-pass wipe. The unit handles 3.5-inch SATA HDDs and SSDs natively and accepts 2.5-inch drives with optional adapters sold separately. A 1536 MB buffer sustains transfer rates up to 120 MB/s.
Suited for high-volume cloning and secure disposal
This duplicator fits operations that must clone many drives quickly or meet strict data-destruction standards before redeployment. It works with any brand, OS or partition layout because it copies sector by sector. Buyers who need to process drives larger than the supported capacity ceiling or who require interfaces other than SATA should look at other equipment.
Eleven simultaneous SATA target ports
The defining specification is the 1:11 port ratio: one source bay and eleven target bays for concurrent duplication. Sanitization runs on twelve bays at once, adding one extra slot for wipe-only tasks. This port count determines whether the unit matches your throughput requirements.
Highlights
- Clones eleven drives at once for rapid deployment
- Sanitises twelve drives simultaneously with DoD 5220 seven-pass wipe
- Standalone operation needs no host PC to run
- Copies up to 120 MB/s with 1536 MB buffer
- Supports 3.5" SATA drives and 2.5" with adapters
Specifications
| Operating Type | Standalone |
|---|
Questions about this item
How many drives can the DupliM 1:11 sanitize at once?
The unit sanitizes up to twelve SATA drives simultaneously using Secure Erase or one-pass, three-pass with verify, or DoD 5220/22-M seven-pass algorithms.
What cooling or noise level should I expect during a full-day copy job?
The duplicator runs as a standalone tower with internal cooling; sustained 120 MB/s transfers across eleven targets keep the chassis warm but within normal operating range for continuous use.
Which drive sizes fit the bays without extra parts?
The eleven target bays and one source bay accept 3.5" SATA HDDs and SSDs directly; 2.5" SATA drives require the optional adapter P/N 450100.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
