We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower duplicator with eleven SATA drive bays, matte finish

DupliM Inc

DupliM Inc 1:11 SATA Duplicator 11 Targets 300MB/s

SKU CH-7G4C-BS74F

Standalone SATA tower clones up to eleven 3.5″ drives at 300 MB/s and sanitizes twelve with DoD 5220/22-M wipe

  • Target1 to 11
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Creates 11 identical SATA clones simultaneously at 300MB/s
  • Sanitizes 12 drives at once with DoD 5220 seven-pass wipe
  • Standalone tower needs no host PC to operate
  • Accepts 3.5" SATA HDDs and SSDs over 8TB capacity
  • 5" SATA drives supported using optional adapter 450100

Industrial SATA Duplicator Tower

The DupliM 1:11 is a standalone tower duplicator that clones one source SATA drive to eleven targets simultaneously at up to 300 MB/s. It also sanitises up to twelve drives at once using Secure Erase, one-pass, three-pass with verify or DoD 5220/22-M seven-pass algorithms. The unit accepts 3.5 inch SATA HDDs and SSDs natively and 2.5 inch SATA drives with optional adapters.

High-Volume Cloning and Sanitisation

IT departments, data centres and forensic labs that need to replicate or wipe many SATA drives in parallel will benefit from the eleven-target throughput and twelve-drive sanitisation capacity. Buyers who only duplicate a single drive occasionally or who require source interfaces other than SATA should consider a different solution.

Simultaneous Target Count

The defining specification is the ability to write to eleven target drives at the same time from a single source, which determines whether the duplicator matches the volume requirements of the deployment.

Highlights

  • Creates 11 identical SATA clones simultaneously at 300MB/s
  • Sanitizes 12 drives at once with DoD 5220 seven-pass wipe
  • Standalone tower needs no host PC to operate
  • Accepts 3.5" SATA HDDs and SSDs over 8TB capacity
  • 5" SATA drives supported using optional adapter 450100

Specifications

Target1 to 11
Data Transfer Rate300MB/s
Operating TypeStandalone

Questions about this item

Will this duplicator work with the 3.5" SATA drives I already own?

The unit accepts 3.5" SATA HDDs and SSDs directly and supports capacities over 8TB, so your existing drives will fit without adapters.

How can I confirm a copy finished correctly on all eleven targets?

The duplicator performs sector-by-sector cloning including partition and boot sectors; the standalone display shows pass or fail status for each of the 11 targets after the operation completes.

Does the box include adapters for 2.5" SATA drives or must I order them separately?

The package does not contain 2.5" adapters; they are sold separately under part number 450100 if you need to clone laptop-style SATA drives.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.