We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A tower duplicator with eleven drive slots and front LCD display

DupliM Inc

DupliM Inc 1:11 SATA Duplicator 11 Targets

SKU CH-5P5T-4YGKM

Standalone SATA duplicator clones 11 drives or sanitizes 12 simultaneously with logging and 1536 MB buffer

  • Operating TypeStandalone
  • Clones 11 drives at once with logging
  • Sanitizes 12 drives simultaneously with audit trail
  • Operates standalone without a host computer
  • Supports 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE
  • Transfers up to 120 MB/s with 1536 MB buffer

1:11 SATA Duplicator for IT Deployments

The DupliM Inc 1:11 SATA Duplicator clones up to 11 SATA or IDE drives simultaneously. It operates as a standalone tower with a front-panel LCD for control. The unit supports 2.5 and 3.5 inch SATA HDDs, SSDs, and 3.5 inch IDE HDDs. It is built for system integrators and IT professionals managing drive deployments.

Check drive interfaces

Verify that your source and target drives use SATA or 3.5 inch IDE connectors. The duplicator handles drives over 8TB in capacity. Ensure the drives fit the 2.5 or 3.5 inch form factors supported by the drive bays. No host computer is required for standalone copy or sanitize operations.

Industrial tower with logging and broad format

The standalone chassis provides 1536 MB of buffer memory for data-only transfers up to 120 MB/s. It sanitizes up to 12 drives at once while logging every session for audit trails. Supported file systems include FAT16, FAT32, NTFS, Linux ext2/3/4, and HFS/HFS+. The LCD interface manages all functions without external software.

Highlights

  • Clones 11 drives at once with logging
  • Sanitizes 12 drives simultaneously with audit trail
  • Operates standalone without a host computer
  • Supports 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE
  • Transfers up to 120 MB/s with 1536 MB buffer

Specifications

Operating TypeStandalone

Questions about this item

What comes in the box and what must I buy separately?

The DupliM 1:11 duplicator tower is supplied as a standalone unit. You must supply your own 2.5 or 3.5 inch SATA hard drives or SSDs, or 3.5 inch IDE hard drives, to use the eleven target bays and the single source bay.

How do I decide which drive capacity to use with the eleven targets?

Each target bay accepts drives over 8TB, so you can mix capacities across the eleven slots. Choose drives that match or exceed the source data size; the duplicator copies sector-by-sector up to the maximum supported capacity.

What does the 120 MB/s transfer rate mean when the tower is running?

The peak SATA throughput is 120 MB/s, shared across all active targets. With eleven drives copying at once, each drive receives a portion of that bandwidth, while the 1536 MB buffer helps sustain steady streaming during large jobs.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.