We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Standalone SATA IDE duplicator tower with two drive bays

DupliM Inc

DupliM Inc 1:1 SATA IDE Duplicator and Sanitizer

SKU CH-M5V2-9NY1R

Standalone duplicator clones SATA and IDE drives sector-by-sector and sanitises up to two drives with one-pass or three-pass verify

  • Operating TypeStandalone
  • Stand-alone cloning with no PC required
  • Sector-by-sector copies preserve partitions and boot sectors
  • Sanitises two drives at once using 1-pass or 3-pass verify
  • Accepts 3.5" IDE and 2.5"/3.5" SATA drives up to 8TB
  • Cross-copies between SATA and IDE source and target

1:1 SATA/IDE Duplicator & Sanitiser

The DupliM Inc Copy Tower is a stand-alone unit that clones 3.5-inch IDE and 2.5/3.5-inch SATA drives sector by sector without a host computer. It also sanitises up to two drives at once using a 1-Pass or 3-Pass wipe with verification. The device accepts source and target drives of mixed interface types in a single operation.

Small offices and hobbyists cloning SATA/IDE drives

This duplicator suits users who need quick, offline duplication of legacy IDE disks or current SATA HDDs and SSDs up to 8TB. It is not for environments that require multi-target cloning beyond a single 1:1 copy. It also does not support M.2 or mSATA drives unless the separate DupliM adapters 450101 and 450103 are purchased.

Stand-alone sector-by-sector copy

The defining specification is the ability to copy from a SATA or IDE source to a SATA or IDE target in any combination while preserving partition and boot sectors. This cross-interface 1:1 cloning mode decides whether the tower fits a workflow that mixes older IDE media with modern SATA storage.

Highlights

  • Stand-alone cloning with no PC required
  • Sector-by-sector copies preserve partitions and boot sectors
  • Sanitises two drives at once using 1-pass or 3-pass verify
  • Accepts 3.5" IDE and 2.5"/3.5" SATA drives up to 8TB
  • Cross-copies between SATA and IDE source and target

Specifications

Operating TypeStandalone

Questions about this item

How many drives can the duplicator sanitise at the same time?

The unit can sanitise up to two drives simultaneously using either a 1-Pass or a 3-Pass wipe with verification.

What interface does the duplicator use for data transfer?

It uses SATA for both source and target connections, and also accepts 3.5-inch IDE drives directly.

Which drive form factors fit in the duplicator bays?

The bays accept 3.5-inch IDE drives and 3.5-inch or 2.5-inch SATA drives; mSATA and M.2 NGFF SATA SSDs require the separate adapters 450101 and 450103.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.