We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower duplicator with six drive bays, matte black finish

DupliM Inc

DupliM 1:5 SATA IDE Logging Duplicator Sanitizer

SKU CH-2XPD-SNQ8B

Standalone tower copies up to five SATA or IDE drives at once and sanitises six with 7-pass overwrite, logging every job

  • Operating TypeStandalone
  • Standalone operation needs no host computer
  • Copies five drives simultaneously with logging
  • Sanitises six drives at once with logging
  • Supports 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE drives
  • Transfer rate up to 120 MB per second with 768 MB buffer

Standalone 1:5 SATA IDE duplicator

This standalone duplicator clones one source drive to five targets at once and sanitises six drives with full logging. It handles 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE drives. Operation requires no host computer, making it suited for IT deployments and forensic workflows.

Upgrade from single-bay copiers

Moving from a single-target copier to this five-target tower multiplies throughput for batch rollouts. The jump is worth it when you regularly deploy identical images to multiple workstations or need auditable sanitisation logs for compliance. Single-drive tasks see no speed gain over a basic dock.

Capacity headroom beyond 8 TB

Drives larger than 8 TB are supported at up to 120 MB per second over SATA with a 768 MB buffer. Fast data-only copies handle FAT16, FAT32, ext2, ext3, ext4 and NTFS partitions. Sector-by-sector mode copies every block regardless of format, so very large or encrypted volumes take proportionally longer.

Highlights

  • Standalone operation needs no host computer
  • Copies five drives simultaneously with logging
  • Sanitises six drives at once with logging
  • Supports 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE drives
  • Transfer rate up to 120 MB per second with 768 MB buffer

Specifications

Operating TypeStandalone

Questions about this item

What drive sizes and interfaces does the 1:5 duplicator accept?

It takes 2.5 and 3.5 inch SATA HDDs and SSDs plus 3.5 inch IDE HDDs, with a capacity limit above 8TB per drive.

How is the duplicator set up and what step is commonly missed?

Power the tower, insert the source drive into the top bay and up to five target drives below, then start the job; the step often missed is confirming every target drive is at least as large as the source before beginning.

What ongoing maintenance does the duplicator require?

No scheduled maintenance is needed beyond keeping the bays dust-free and verifying the 768 MB buffer operates normally during high-speed transfers up to 120 MB/s.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.