DUKANE
DUKANE 456-8766 200W projector lamp 3000 hrs
A 200W replacement projector lamp module with a 3,000-hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- 200W NSH lamp delivers specified brightness
- 3000-hour rated life supports extended use
- Manufactured to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
Replacement lamp for Dukane projectors
The Dukane 456-8766 module delivers a new 200 W NSH bulb inside a complete housing, so it fits straight into compatible Dukane projectors without extra assembly. It is built to ISO 9001 quality checks for beam performance, ignition, voltage and run-time.
Suits owners needing a direct 200 W replacement
This lamp serves users whose Dukane unit calls for the 456-8766 part number and a 200 W NSH source. It does not suit projectors that require a different wattage, a different connector or a longer rated life.
3 000-hour rated life at 200 W
At the specified 200 W the lamp provides up to 3 000 hours of operation before brightness drops to half. Heavy daily use will reach that limit sooner; installations needing significantly more hours between changes should verify whether their projector supports a higher-life alternative.
Highlights
- Ready to install with pre-assembled bulb and housing
- 200W NSH lamp delivers specified brightness
- 3000-hour rated life supports extended use
- Manufactured to ISO9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | Dukane |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 3,000 Hrs. |
Questions about this item
Which Dukane projector models accept the 456-8766 lamp module?
The 456-8766 lamp is built as a direct replacement for Dukane projectors that originally shipped with this part number; check your projector’s service manual or the label on the old lamp to confirm it lists 456-8766 before ordering.
Will the 200W NSH bulb change brightness or fan noise compared with the original lamp?
Because the module uses a 200W NSH bulb matching the original specification, light output and thermal load remain the same, so fan behaviour and image brightness should be identical to the factory lamp.
How can I verify the lamp is running at the rated 3,000-hour life after installation?
Reset the projector’s lamp-hour counter at install, then monitor the on-screen timer; the lamp is designed to reach 3,000 hours before brightness drops to half its initial level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



