We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel duct hanger, 1 in wide by 11-1/2 in high, round 20 ga strap

Ductmate

Ductmate GRRDH10GA20 duct hanger 20 ga 1 in x 11-1/2 in

SKU CH-80J0-NQMDV

Galvanised steel duct hanger for 10 in duct, 20 ga thickness, 1 in by 11-1/2 in, 260 lb capacity, SMACNA standard, .4 lb weight

  • MaterialHAWA
  • Supports heavy ductwork with a 260 lb load capacity
  • Fits 10 in nominal duct diameter for standard installations
  • Built from galvanized steel meeting SMACNA standards
  • 20 ga material thickness balances strength and weight
  • 1 in width compatible with common strapping sizes

Duct hanger 20 gauge for 10 in duct

This galvanised-steel duct hanger is sized for a nominal 10 in round duct and carries a 260 lb load rating. The 20 ga material thickness and 1 in strapping compatibility suit residential and light-commercial HVAC installations. It meets SMACNA standards and weighs .4 lb. Overall height is 11 1/2 in with a 1 in width.

Installers needing SMACNA-rated support for 10

Contractors who require a code-compliant hanger for standard 10 in diameter ductwork will find the load capacity and strapping match well. Projects that use rectangular duct, larger diameters or heavier loads exceeding 260 lb will need a different hanger style. The fixed 11 1/2 in height also limits use where vertical adjustment is required.

260 lb load capacity at 20 ga thickness

The single figure that decides fit is the 260 lb rated load combined with 20 ga steel construction. If the duct assembly including insulation and airflow pressure stays within this limit the hanger is appropriate; heavier systems must specify a higher-capacity support.

Highlights

  • Supports heavy ductwork with a 260 lb load capacity
  • Fits 10 in nominal duct diameter for standard installations
  • Built from galvanized steel meeting SMACNA standards
  • 20 ga material thickness balances strength and weight
  • 1 in width compatible with common strapping sizes

Specifications

MaterialHAWA
BrandDUCTMATE

Questions about this item

Should I pick the 20 ga or a lighter gauge for a 10 in duct?

The 20 ga steel hanger is rated for 260 lb and matches SMACNA guidelines for a 10 in nominal duct, so it handles typical residential loads without bending.

What does the 260 lb load capacity mean when the hanger is installed?

It means the galvanized steel strap can safely support up to 260 lb of duct weight when fastened to 1 in strapping at the specified 11-1/2 in height.

Does the SMACNA standard limit the spacing or span of this hanger?

SMACNA sets the design criteria this hanger meets; the 20 ga thickness and 260 lb rating define the maximum load per support point under that standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.