Dual Electronics LU43PB 4" 3-Way Wired Bookshelf Speakers Black
Weather-resistant 4-inch 3-way bookshelf speakers deliver 100 W peak power for indoor or outdoor mounting
- TypeBookshelf
- ColorBlack
- Configuration3.0
- Connector TypeWired
- Total Power100 watts
- Satellite RMS Power /ea100 watts
- Weather-resistant ABS enclosure and UV coating protect drivers from sun and moisture
- 3-way component system with 4-inch woofer, 1.6-inch midrange and 1.06-inch tweeter covers 100 Hz to 20 kHz
- 50 watts RMS and 100 watts peak power handling delivers room-filling volume
- Mount horizontally or vertically on wall or ceiling using included hardware
- 4-ohm nominal impedance and 86 dB sensitivity suit a wide range of amplifiers
Indoor Outdoor Bookshelf Speakers
These 4 inch three way wired bookshelf speakers are built for indoor and outdoor placement. The weather resistant ABS enclosure with UV resistant coating handles moisture and sun exposure. A 100 watt peak power rating drives a 4 inch woofer, 1.6 inch midrange and 1.06 inch piezo tweeter for full range sound.
Buyers Needing Simple Wired Install
The speakers suit listeners who want a permanent wired setup on a patio, in a garage or on a shelf. Mounting hardware is included for horizontal or vertical orientation on walls or ceilings. Buyers who want wireless streaming without a separate amplifier should look at something else.
Sustained Output With 4 Ohm Load
At 50 watts RMS per speaker the system delivers steady output during long listening sessions. The 4 ohm nominal impedance draws more current from an amplifier than 8 ohm designs, so the connected amp must handle that load continuously. Sensitivity of 86 dB at 2.83 volts means moderate amplifier power reaches comfortable volume levels.
Highlights
- Weather-resistant ABS enclosure and UV coating protect drivers from sun and moisture
- 3-way component system with 4-inch woofer, 1.6-inch midrange and 1.06-inch tweeter covers 100 Hz to 20 kHz
- 50 watts RMS and 100 watts peak power handling delivers room-filling volume
- Mount horizontally or vertically on wall or ceiling using included hardware
- 4-ohm nominal impedance and 86 dB sensitivity suit a wide range of amplifiers
Specifications
| Brand | Dual Electronics |
|---|---|
| Series | 43 |
| Model | LU43PB |
| Part Number | LU43PB |
| Type | Bookshelf |
| Color | Black |
| Configuration | 3.0 |
| Connector Type | Wired |
| Total Power | 100 watts |
| Satellite RMS Power /ea | 100 watts |
| Driver | dynamic_driver |
| Frequency Response | 100 hertz |
| Impedance | 4 ohm |
| Remote | remote |
| Dimension | 5.3 in x 5.3 in x 8.3 in |
| Weight | 2.368 kilograms |
| Package Contents | Speakers |
Questions about this item
What amplifier power and impedance rating do I need to drive these 4-ohm bookshelf speakers?
An amplifier rated for 4-ohm loads and capable of delivering up to 100 watts peak per channel will match the speaker's 50-watt RMS and 100-watt peak handling.
Can I keep my existing speaker wire when installing these LU43PB speakers?
Yes, the speakers use standard wired terminals that accept bare wire or banana plugs, so any existing speaker cable with adequate gauge for the run length will work.
How can I verify the 3-way driver array is functioning correctly after mounting?
Play a full-range test track and listen for clear output from the 4-inch woofer, 1.6-inch midrange and 1.06-inch piezo tweeter; the system sensitivity is rated at 86 dB at 2.83 volts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK Hecate G1000 Black speaker 10W Bluetooth 5.3 12 RGB 2.5in 3.5mm
- Black



