We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6x9 midrange speaker with red metal mesh grille and bullet dust cover

DS18

DS18 PRO-X694BM 6x9" midrange car speaker 400W max 200W RMS 4Ω 98dB 1.5" CCAW coil 27oz magnet black

SKU CH-S4ZV-RWV8D MPN PRO-X694BM

A 6x9-inch midrange car speaker rated for 200W RMS and 400W peak power with a 98dB sensitivity and 1.5-inch CCAW voice coil

  • TypeSpeaker
  • Speaker Size6" x 9"
  • Vehicle TypeAutomotive
  • ColorBlack
  • Peak Power400 Watts
  • RMS Power200 Watts
  • 200W RMS power drives vocals cleanly
  • 400W max headroom handles dynamic peaks
  • 98dB sensitivity produces loud output with less power
  • 5" CCAW voice coil resists heat for long life
  • 27oz magnet provides strong motor control

Midrange driver for full-range car audio

The DS18 PRO-X694BM is a 6x9 inch midrange loudspeaker built for automotive sound systems. It targets listeners who want clearer vocals and instrument detail than factory speakers provide. A 1.5 inch high-temperature CCAW voice coil and 27oz magnet structure support sustained output. The black metal mesh grille is included for protection.

200W RMS continuous with 400W peak headroom

At 4 ohms impedance and 98dB sensitivity, the driver converts amplifier power into volume efficiently. The 200W RMS rating defines the comfortable daily power window for music and voice. The 400W maximum figure marks the short-term limit before thermal compression or mechanical stress risk increases. The bullet dust cover shields the coil during high excursion.

Upgrade from factory coaxial or basic component sets

This speaker replaces stock 6x9 units that lack dedicated midrange clarity or power handling. The jump is worth it when the system uses an external amplifier capable of delivering clean power near the 200W RMS mark. It is not for buyers who need a woofer for deep bass or a tweeter for high frequencies.

Highlights

  • 200W RMS power drives vocals cleanly
  • 400W max headroom handles dynamic peaks
  • 98dB sensitivity produces loud output with less power
  • 5" CCAW voice coil resists heat for long life
  • 27oz magnet provides strong motor control

Specifications

BrandDS18
TypeSpeaker
Speaker Size6" x 9"
ModelPRO-X694BM
Vehicle TypeAutomotive
ColorBlack
Part NumberPRO-X694BM
Peak Power400 Watts
RMS Power200 Watts
Sensitivity98 dB
Impedance4 Ohm
FeaturesMax Power Handling: 400 Watts and 200W RMS

Questions about this item

Will the 4 Ω impedance and 200 W RMS rating match my older 4 Ω amplifier without rewiring?

Yes, the 4 Ω nominal impedance and 200 W RMS power handling are standard values that work with most existing 4 Ω car amplifiers and factory wiring.

How can I verify the 98 dB sensitivity is performing correctly once installed?

Play a familiar track at moderate volume; the speaker should produce clear, loud midrange with little distortion, confirming the rated 98 dB sensitivity is being realised.

Does the box include the red metal mesh grille and bullet dust cover, or must I buy mounting hardware separately?

The red metal mesh grille and bullet dust cover are supplied; only standard mounting screws and speaker wire need to be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.