DS18
DS18 GEN-X6.5C 6.5" 2-way component car speaker set
A 6.5" 2-way component set with 50 W RMS, 150 W peak, 4 Ω impedance and 76 Hz–20 kHz response
- Type2-way Speaker
- Speaker Size6.5"
- Vehicle TypeAutomotive
- ColorBlack
- Peak Power150 Watts
- RMS Power50 Watts
- Clear highs from 1.5 mm silk dome tweeters
- Balanced sound via 3.5 kHz crossover network
- Strong mid-bass from 6.5" paper cone woofers
- Reliable output with 50 W RMS power handling
- Easy fit at 57.2 mm mounting depth
Product purpose
The DS18 GEN-X6.5C is a 6.5-inch 2-way component car speaker set built for drivers who want clearer sound than factory speakers provide. It includes two mid-bass woofers, two tetoron silk dome tweeters and two passive crossovers in one package.
Fit and alternatives
This set suits owners upgrading a standard 6.5-inch door location who can accommodate a 57.2 mm mounting depth and a 16 mm tweeter protrusion. Buyers needing shallower woofers, a different impedance or a coaxial design should look elsewhere.
Power and output
RMS power is 50 watts with a 150 watt peak rating, giving comfortable headroom for typical head-unit amplification. The 4 ohm impedance and 86 dB sensitivity work well with modest power, while the 76 Hz low-frequency limit means a subwoofer is needed for deep bass.
Highlights
- Clear highs from 1.5 mm silk dome tweeters
- Balanced sound via 3.5 kHz crossover network
- Strong mid-bass from 6.5" paper cone woofers
- Reliable output with 50 W RMS power handling
- Easy fit at 57.2 mm mounting depth
Specifications
| Brand | DS18 |
|---|---|
| Type | 2-way Speaker |
| Speaker Size | 6.5" |
| Model | GEN-X6.5C |
| Vehicle Type | Automotive |
| Color | Black |
| Part Number | GEN-X6.5C |
| Peak Power | 150 Watts |
| RMS Power | 50 Watts |
| Impedance | 4 Ohm |
| Features | 6.5" Speakers, 1.5mm Silk Dome Tweeters, Crossover Network |
Questions about this item
What amplifier power rating matches the 50 W RMS and 4 Ω impedance of these speakers?
Choose an amplifier that delivers roughly 50 W RMS per channel into 4 Ω so the mid-bass woofers and silk dome tweeters receive clean power without clipping.
Will the 57.2 mm mounting depth and 6.5" cutout fit the factory door locations in my older vehicle?
Measure your door cavity; the woofers need at least 57.2 mm clearance behind the panel and a standard 6.5" opening, while the 16 mm tweeter protrusion requires a flush or surface-mount spot on the dash or pillar.
How can I verify the crossover is directing frequencies correctly after installation?
Play a frequency sweep from 76 Hz to 20 kHz; the 3.5 kHz, 12 dB/octave crossover should hand off cleanly between the paper-cone woofers and the tetoron dome tweeters with no gap or overlap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



