We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch car subwoofer with red steel basket and paper glass fiber cone

DS18

DS18 GEN-X124D 12" 900W 450W RMS Dual 4 Ohm car speaker

SKU CH-913J-8KJEZ MPN GEN-X124D

A 12-inch car subwoofer delivering 450W RMS and 900W peak power with dual 4-ohm voice coils for flexible wiring

  • TypeSpeaker
  • Speaker Size0.5"
  • Vehicle TypeAutomotive
  • ColorRed
  • Voice CoilDual
  • Peak Power900 Watts
  • 450 W RMS delivers strong, sustained bass output
  • 900 W peak power handles demanding musical transients
  • Dual 4 Ω voice coils allow flexible wiring configurations
  • Paper and glass-fibre cone with foam edge provides controlled cone movement
  • 5 dB sensitivity produces high volume with modest amplifier power

12-inch subwoofer for car audio

The DS18 GEN-X124D is a 12-inch subwoofer built for car audio systems that need deep bass. It handles 450 watts RMS and 900 watts peak power with a dual 4-ohm voice coil. The cone uses paper with glass fibre and a foam edge for durability. A red steel basket and ferrite magnet complete the motor structure.

Wiring flexibility and system fit

The dual voice coil allows parallel, series or independent wiring to match amplifier loads. Buyers who need a single 4-ohm load or a different impedance should look elsewhere. The 87.5 dB sensitivity means it works well with moderate amplifier power. Installers without a suitable enclosure or amplifier should consider other options.

Dual 4-ohm voice coil configuration

The dual 4-ohm voice coil is the specification that determines wiring options and amplifier matching. It presents either a 2-ohm or 8-ohm load depending on connection. This flexibility lets the subwoofer integrate with many mono or multi-channel amplifiers. Verify your amplifier's stable impedance range before purchase.

Highlights

  • 450 W RMS delivers strong, sustained bass output
  • 900 W peak power handles demanding musical transients
  • Dual 4 Ω voice coils allow flexible wiring configurations
  • Paper and glass-fibre cone with foam edge provides controlled cone movement
  • 5 dB sensitivity produces high volume with modest amplifier power

Specifications

BrandDS18
TypeSpeaker
Speaker Size0.5"
ModelGEN-X124D
Vehicle TypeAutomotive
ColorRed
Voice CoilDual
Part NumberGEN-X124D
Peak Power900 Watts
RMS Power450 Watts
Sensitivity87.5 dB
Impedance4 Ohm
FeaturesFoam Edge and Paper with Glass Fiber Cone

Questions about this item

Will the DS18 GEN-X124D work with my existing amplifier that is stable at 2 ohms or 8 ohms?

The subwoofer presents a dual 4 ohm load; wiring the coils in parallel gives a 2 ohm load and wiring them in series gives an 8 ohm load, matching either amplifier stability.

How can I confirm the GEN-X124D is performing correctly after installation?

Measure the impedance across the terminals to confirm the expected 2 ohm or 8 ohm reading, then play music and listen for clean bass output without mechanical noise.

What is included with the GEN-X124D and what must I purchase separately?

The box contains one 12 inch subwoofer with a red steel basket, foam edge and paper glass fiber cone; you must supply an enclosure, amplifier and wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.