We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White carbon-steel wall mount with 7.8in arm and 360° swivel head

Drsn Mini Projector Wall Mount, 7.8in Arm, 360° Rotation, White

SKU CH-X4AZ-WY1BZ

A carbon-steel wall bracket with a 7.8 in arm, 360° horizontal rotation and 60° vertical tilt holds mini projectors up to 11 lb

  • TypeWall Mount
  • CompatibilityMini projectors
  • SpecificationsAdjustable, Drsn-PortableElectronicDeviceMount-1, Drsn, Carb
  • Screen MaterialCarbon Steel
  • ColorWhite
  • FeaturesAdjustable, Wall Mount, Mini projectors, Carbon Steel, 11 po
  • Short 7.8 in arm keeps mini projectors close to the wall
  • 360° horizontal rotation lets you aim the image in any direction
  • 60° vertical tilt adjusts the projection angle up or down
  • Carbon steel frame with anti-rust coating resists corrosion over time
  • Three-hole mounting base secures the bracket firmly to the wall

Mini Projector Wall Mount

The Drsn wall mount is a compact bracket designed for mini projectors and lightweight cameras weighing up to 8 lb. Its 7.8 in arm extends a short distance from the wall, keeping the device close to the surface while still allowing flexible positioning. The white carbon-steel finish suits home, office or classroom settings.

Thermals Noise Power

As a passive metal bracket the mount generates no heat, produces no noise and draws no power. The carbon-steel construction with anti-rust coating resists corrosion over long periods without requiring any active cooling or electrical connection.

8 lb Load Limit

The bracket supports devices up to 8 lb and provides 360° horizontal rotation plus 60° vertical tilt through an elastic screw mechanism. Installation requires drilling three holes in the wall. It is not suitable for heavier projectors or equipment that exceeds the stated weight capacity.

Highlights

  • Short 7.8 in arm keeps mini projectors close to the wall
  • 360° horizontal rotation lets you aim the image in any direction
  • 60° vertical tilt adjusts the projection angle up or down
  • Carbon steel frame with anti-rust coating resists corrosion over time
  • Three-hole mounting base secures the bracket firmly to the wall

Specifications

BrandDrsn
ModelDrsn-PortableElectronicDeviceMount-1
Part NumberDrsn-PortableElectronicDeviceMount-1
TypeWall Mount
CompatibilityMini projectors
SpecificationsAdjustable, Drsn-PortableElectronicDeviceMount-1, Drsn, Carbon Steel, 6 L x 7 W x 7 H centimeters, 11 pounds, Wall Mount, Mini projectors
Screen MaterialCarbon Steel
ColorWhite
FeaturesAdjustable, Wall Mount, Mini projectors, Carbon Steel, 11 pounds

Questions about this item

How do I install the 7.8in arm wall mount and what is the step people often miss?

Drill three holes in the wall for the thickened base, then attach the mount. The step often missed is ensuring the base sits flush so the 360° rotation and 60° tilt move freely without binding.

What maintenance or replacement will the carbon steel bracket need later?

The anti-rust paint coating protects the carbon steel frame. Inspect the coating periodically; if chips appear, touch up with paint to prevent rust. The elastic screw may loosen over time and should be retightened.

What limit shows up first when the mount holds a mini projector near the 8lb capacity during sustained use?

The 8lb loading capacity is the primary limit. Exceeding it stresses the elastic screw and three-hole base, reducing the 360° rotation smoothness and 60° tilt range before any structural failure occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.