We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black split corrugated polyethylene tubing coil, one inch nominal size, three hundred foot length

Drossbach

Drossbach Corrugated Tubing PE 1 in 300 ft Split Black

SKU CH-8X5W-QD37E

Corrugated polyethylene tubing with a split design for easy wire insertion, 300 ft length and 1 in nominal size, rated from -40 to 185 °F

  • TypeCable Management & Conduit
  • Operating range from -40 °F to 185 °F suits harsh environments
  • 300 ft continuous length reduces joins in long cable runs
  • Split corrugated design allows quick installation over existing wires
  • Polyethylene construction resists chemicals and abrasion in tough conditions
  • RoHS, REACH and NAFTA compliant for regulated projects

Drossbach 1 in Split Corrugated Tubing

This Drossbach polyethylene conduit measures 1 in nominal size with an inside diameter of 1.02 in to 1.07 in and an outside diameter of 1.25 in to 1.30 in. The 300 ft roll features a split design for easy installation over existing cable bundles. It suits automotive, industrial and general wire-management tasks where abrasion resistance and chemical resistance are required. The black tubing meets RoHS, REACH and NAFTA compliance standards.

Verify Diameter and Temperature Range Before

Confirm that your wire bundles fit within the 1.02 in to 1.07 in inside diameter range and that the 1.25 in to 1.30 in outside diameter clears your routing paths. The tubing operates from -40 Degrees F to 185 Degrees F, so ensure the installation environment stays within these limits. No self-extinguishing rating is provided, so check local codes for fire-safety requirements. The split construction allows retrofit without disconnecting terminated cables.

Thermal and Abrasion Performance in Normal Use

The polyethylene wall thickness spans 0.01 in to 0.12 in, delivering good abrasion resistance for harness protection. Operating temperatures from -40 Degrees F to 185 Degrees F cover typical engine-bay and industrial conditions without degradation. The material is chemically resistant to common automotive fluids and solvents. Because the tubing is not self-extinguishing, it will not add flame-retardant properties to the assembly.

Highlights

  • Operating range from -40 °F to 185 °F suits harsh environments
  • 300 ft continuous length reduces joins in long cable runs
  • Split corrugated design allows quick installation over existing wires
  • Polyethylene construction resists chemicals and abrasion in tough conditions
  • RoHS, REACH and NAFTA compliant for regulated projects

Specifications

BrandDROSSBACH
TypeCable Management & Conduit

Questions about this item

Does the 300 ft roll of 1 in corrugated PE tubing arrive pre-split or must I slit it myself?

The tubing is supplied split along its length so wires can be inserted without threading them through a closed tube.

Should I select the fine-profile 1 in tubing or a coarser profile for my application?

This listing is the fine-profile version; the nominal 1 in size gives an inside diameter of 1.02 in to 1.07 in and an outside diameter of 1.25 in to 1.30 in.

Will the 185 °F maximum operating temperature hold up near an engine compartment?

The polyethylene tubing is rated for continuous use from -40 °F to 185 °F and offers good abrasion resistance, making it suitable for high-heat automotive areas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.