Drill America
Drill America DWC5-530-181 2" x 1" HSS Annular Cutter with Pilot Pin pneumatic accessory
High-speed steel annular cutter with pilot pin for magnetic drill presses, cutting only the material needed for a clean hole
- High-speed steel resists wear during general-purpose cutting
- Cuts only the material needed for a clean hole
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate hole alignment
- California Proposition 65 warning for cancer and reproductive harm
Drill America DWC5-530-181 Annular Cutter
The Drill America DWC5-530-181 is a high-speed steel annular cutter built for fast, efficient hole making in metal. It cuts only the material necessary to produce a quality hole, making it suitable for general-purpose fabrication and maintenance tasks. The tool is designed exclusively for magnetic drill presses and must not be used with standard hand drills or drill presses.
3/4" Weldon Shank and Pilot Pin
A 3/4" Weldon shank locks the cutter securely into a compatible magnetic drill press for stable, repeatable alignment. The included pilot pin centres the cut and ejects the slug once the hole is complete, reducing manual handling and downtime. High-speed steel construction provides a balance of hardness and toughness for wear resistance in everyday workshop use.
California Proposition 65 Notice
This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. No specific thermal, noise or power-draw data is supplied for the accessory itself; those characteristics depend on the magnetic drill press used. Operators should follow the press manufacturer's guidelines and use appropriate personal protective equipment.
Highlights
- High-speed steel resists wear during general-purpose cutting
- Cuts only the material needed for a clean hole
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate hole alignment
- California Proposition 65 warning for cancer and reproductive harm
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What shank standard does the DWC5-530-181 annular cutter use and what machine does it require?
It has a 3/4" Weldon shank and must be used with a magnetic drill press only.
What physical dimensions must the magnetic drill press accommodate for this cutter?
The cutter measures 2" in diameter with a 1" depth of cut, so the press needs capacity for that size.
How is the pilot pin installed and what common mistake should be avoided?
Insert the supplied pilot pin into the cutter's centre hole before mounting; do not use the cutter in a standard hand drill or drill press.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
