Drill America
Drill America DWC5-530-111 annular cutter 1/2" x 1" with pilot pin
High-speed steel annular cutter creates 1/2-inch holes with a Weldon shank for magnetic drill presses and includes a pilot pin
- High-speed steel cuts only the perimeter for fast, efficient hole making
- Weldon shank fits magnetic drill presses for secure mounting
- Pilot pin included to guide the cutter and eject the slug
- High-speed steel construction balances hardness and toughness for wear resistance
- California Proposition 65 warning applies to this product
Drill America DWC5-530-111 annular cutter
This Drill America high-speed steel annular cutter produces a 1/2 inch diameter hole with a 1 inch depth of cut. It is designed for use with magnetic drill presses that accept a 3/4 inch Weldon shank. The cutter removes only the perimeter material for fast, efficient hole making in general-purpose applications. It is not compatible with standard hand drills or conventional drill presses.
Build quality and day-to-day use
The high-speed steel construction provides a balance of hardness and toughness for wear resistance during repetitive cutting. A pilot pin is included to align the cutter and eject the slug after each hole. The 3/4 inch Weldon shank locks securely into magnetic drill presses for stable, accurate operation on the job site. California Proposition 65 warnings apply to this product.
Compatibility check before ordering
Verify that your magnetic drill press accepts a 3/4 inch Weldon shank before purchasing this cutter. Ensure the workpiece material suits high-speed steel tooling for general-purpose cutting. Confirm you do not intend to use this accessory with a standard hand drill or stationary drill press, as it is designed exclusively for magnetic drill presses.
Highlights
- High-speed steel cuts only the perimeter for fast, efficient hole making
- Weldon shank fits magnetic drill presses for secure mounting
- Pilot pin included to guide the cutter and eject the slug
- High-speed steel construction balances hardness and toughness for wear resistance
- California Proposition 65 warning applies to this product
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What does the 3/4" Weldon shank limit the cutter to?
The 3/4" Weldon shank fits magnetic drill presses only; it cannot be used in a standard hand drill or bench drill press.
What physical shank does the DWC5-530-111 need to mount?
It requires a 3/4" Weldon shank seat, the standard fitting on magnetic drill presses.
How is the pilot pin fitted, and what step is often missed?
Insert the supplied pilot pin through the cutter's centre hole until it seats; forgetting the pin leaves the cutter unguided and the slug trapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
