Drill America
Drill America ANC5-530-272 1-13/16" X 2" nACo Blue pneumatic accessory
A 1-13/16" x 2" annular cutter with nACo Nano-Composite coating for extended life in steel and stainless steel using a magnetic drill press
- nACo Nano-Composite Blue coating extends tool life up to 30%
- Cuts steel, cast iron, heated and stainless steels efficiently
- M2 High Speed Steel removes only necessary material for fast holes
- 3/4" Weldon Shank fits most magnetic drill presses
- Includes pilot pin for immediate magnetic drill press use
Drill America ANC5-530-272 annular cutter
The Drill America ANC5-530-272 is an annular cutter with nACo Nano-Composite Blue coating designed for magnetic drill presses. It cuts steel, cast iron, heated and stainless steels using M2 high-speed steel. The 3/4-inch Weldon shank fits most magnetic drills, also called mag drills. A pilot pin is included for alignment.
Verify magnetic drill press compatibility
This accessory is for use with a magnetic drill press only and must not be used with a standard hand drill or standard drill press. Check that your magnetic drill press accepts a 3/4-inch Weldon shank before ordering. The cutter removes only the necessary material for fast, efficient hole making in difficult materials.
Sustained cutting in tough alloys
The nACo Nano-Composite coating increases tool life up to 30 percent compared to traditional HSS annular cutters. It provides extra protection against tool wear and high heat during extended cutting sessions. This allows the cutter to maintain performance when working through steel, cast iron and stainless steels under continuous load.
Highlights
- nACo Nano-Composite Blue coating extends tool life up to 30%
- Cuts steel, cast iron, heated and stainless steels efficiently
- M2 High Speed Steel removes only necessary material for fast holes
- 3/4" Weldon Shank fits most magnetic drill presses
- Includes pilot pin for immediate magnetic drill press use
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What comes in the box and do I need to buy anything else to use it?
The cutter includes a pilot pin and a 3/4" Weldon shank that fits most magnetic drill presses. A compatible mag drill is required; it cannot be used with a standard hand drill or drill press.
Which coating or material version should I choose for longest life in steel?
The nACo Nano-Composite Blue coating on M2 high-speed steel increases tool life up to 30% versus traditional HSS annular cutters and resists wear in steel, cast iron and stainless.
What does the 30% life increase mean when the cutter is on a real mag drill?
The coating reduces wear and handles high heat so the cutter stays sharp longer, letting you complete more holes per tool in tough materials like heated or stainless steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
