Drill America
Drill America ANC5-530-151 1-3/8" X 1" nACo Blue pneumatic accessory
Nano-composite coated annular cutter increases tool life by 30% for magnetic drill presses
- nACo Nano-Composite coating extends tool life up to 30%
- Cuts difficult materials including steel, cast iron and stainless steel
- nACo Nano coating provides extra protection against wear and high heat
- M2 High Speed Steel removes only necessary material for fast, efficient holes
- 3/4" Weldon shank fits most magnetic drill presses
Drill America nACo Blue cutter
The Drill America ANC5-530-151 is a 1-3/8" X 1" nACo Nano-Composite coated blue annular cutter made from M2 high speed steel. It is designed for professional operators cutting difficult materials such as steel, cast iron, heated steel and stainless steel using a magnetic drill press. The coating increases tool life up to 30% compared to traditional HSS annular cutters while offering extra protection against wear and high heat.
Replaces standard HSS annular cutters
This cutter upgrades from uncoated high speed steel annular cutters when longer tool life and better heat resistance are required. The jump is worth it for shops drilling tough alloys or high volumes where reduced wear and faster, more efficient hole making lower cost per hole. It is not for buyers who need a cutter compatible with standard hand drills or conventional drill presses.
Magnetic drill press installation only
The 3/4" Weldon shank fits most magnetic drill presses, also called mag drills, and the package includes a pilot pin for alignment. Installation is straightforward on the correct machine. The most common error is attempting to use this cutter with a standard hand drill or drill press, which the manufacturer explicitly warns against and which will not work.
Highlights
- nACo Nano-Composite coating extends tool life up to 30%
- Cuts difficult materials including steel, cast iron and stainless steel
- nACo Nano coating provides extra protection against wear and high heat
- M2 High Speed Steel removes only necessary material for fast, efficient holes
- 3/4" Weldon shank fits most magnetic drill presses
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What size Weldon shank does the 1-3/8" nACo annular cutter use?
The cutter has a 3/4" Weldon shank that fits most magnetic drill presses.
How do I install the pilot pin that comes with the cutter?
Insert the supplied pilot pin through the centre hole of the cutter before mounting it in the mag-drill chuck; the pin must engage the workpiece first to start the cut.
When should I replace the nACo coated cutter?
Replace the cutter when the blue nano-composite coating shows visible wear or when cutting speed drops noticeably in steel, cast iron or stainless steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
