Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00921846BTC
In stock
Dreamholder Touch Control USB Table Lamp 3-Way Dimmable USB-C USB-A AC Outlet Gold 16.9in 1.8lb
A fabric-shaded table lamp with touch dimming, dual USB ports, USB-C and an AC outlet in a gold finish
- Lamp typeTable Lamp
- Lamp wattage6 watts
- Voltage120 volts_of_alternating_current
- Socket baseE26
- Switch typeTouch
- Shade materialFabric
- Touch any base surface to cycle through three brightness levels
- Built-in USB-C and USB-A ports deliver 5V/2.1A charging without extra adapters
- Integrated AC outlet supplies up to 7.5A for small appliances while lamp is on or off
- Dimmable E26 LED bulb included so the lamp works straight out of the box
- Slim 16.9in gold-finished design weighs just 1.8lb for easy bedside placement
Touch-Control Table Lamp with Integrated Charging
This gold-finished table lamp stands 16.9 inches tall and weighs 1.8 lb. It includes a dimmable E26 LED bulb rated at 6 watts for 120 V AC operation. The linen fabric shade and matte base suit bedside or desk use, while the touch-sensitive pole and base replace a traditional switch for simple low, medium, high and off selection.
Thermals Noise and Power Draw
The 6 W LED bulb produces minimal heat during extended use and operates silently with no fan or moving parts. Power consumption remains at 6 W when the light is on at full brightness and drops further at lower touch levels. The charging station circuitry draws only standby current when no devices are connected, whether the lamp is illuminated or switched off.
Dual USB Ports AC Outlet and Memory Function
Built-in USB-A and USB-C ports deliver 5 V at 2.1 A for phones, headsets or similar devices, while the AC outlet supports up to 7.5 A for small appliances such as a humidifier or speaker. All ports remain active regardless of the lamp’s on/off state. A long press on any touch zone turns the light off instantly, and the memory function restores the last brightness level when the lamp is turned on again.
Highlights
- Touch any base surface to cycle through three brightness levels
- Built-in USB-C and USB-A ports deliver 5V/2.1A charging without extra adapters
- Integrated AC outlet supplies up to 7.5A for small appliances while lamp is on or off
- Dimmable E26 LED bulb included so the lamp works straight out of the box
- Slim 16.9in gold-finished design weighs just 1.8lb for easy bedside placement
Specifications
| Brand | Dreamholder |
|---|---|
| Lamp type | Table Lamp |
| Lamp wattage | 6 watts |
| Voltage | 120 volts_of_alternating_current |
| Socket base | E26 |
| Switch type | Touch |
| Shade material | Fabric |
| Location/Usage | Indoor |
| Listing | 1 |
| Finish | Matte |
| Shape | Bulb |
| Style | Linen shade+Gold base |
| Weight | 1.8 lb |
| Type | Table Lamp |
| Size Dimensions | 5.1 L x 5.1 W x 16.9 H inches |
| Height | 16.9 inches |
Questions about this item
How do I set up the touch control on the Dreamholder lamp base and pole, and what step do people miss?
Plug the lamp into a 120 volt outlet, insert the included dimmable LED bulb into the E26 socket, then touch any metal part of the base or pole to cycle through Low, Medium, High and Off. The step often missed is holding the touch for a long press to turn the light off directly from any brightness level.
What maintenance will the Dreamholder lamp need over time?
Replace the E26 dimmable LED bulb when it no longer provides sufficient light; the fabric shade can be dusted with a soft brush, and the touch sensor surface should be wiped clean if it becomes unresponsive.
What is the first limit reached when charging multiple devices from the Dreamholder lamp for extended periods?
The AC outlet is rated at a maximum of 7.5 amps, so the total draw of any plugged-in appliance must stay below that limit; the dual USB ports share a combined 5 volt 2.1 amp output, which will throttle if exceeded.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
