We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Forty black double-headed bear-claw screws with Phillips drive, 0.8 inch (25 mm) long

Double-Headed Bear Claw Screw 40-pack .8in 25mm Black

SKU CH-423D-Y61N3

A 40-pack of .8-inch double-headed bear claw screws holds up to 33 lbs on drywall and 100 lbs on wood studs

  • Holds 33 lbs on drywall with nickel-iron alloy
  • Self-drilling tip installs without pilot holes in gypsum board
  • 40 screws fit D-rings, wire, sawtooth and keyhole mounts
  • Rated 100 lbs when driven into wood studs
  • .8 inch length suits frames mirrors clocks and seasonal décor

What You Get

The pack contains 40 double-headed bear claw screws finished in black, each measuring .8 inch or 25 millimetres long. They are made from a nickel-iron alloy and designed for hanging picture frames, mirrors, clocks and seasonal decorations on drywall or wood studs.

Check Your Wall First

These screws are not compatible with wall anchors and must not be used on concrete or ceramic surfaces. They self-drill into drywall without a pilot hole and can also be driven into wooden studs for heavier loads using a Phillips screwdriver or power drill.

Load Limits and Installation

On drywall the screws hold up to 33 lbs, while anchoring into a wood stud increases capacity to 100 lbs. The self-drilling tip cuts cleanly through gypsum board, so normal installation is quick and produces minimal dust or noise.

Highlights

  • Holds 33 lbs on drywall with nickel-iron alloy
  • Self-drilling tip installs without pilot holes in gypsum board
  • 40 screws fit D-rings, wire, sawtooth and keyhole mounts
  • Rated 100 lbs when driven into wood studs
  • .8 inch length suits frames mirrors clocks and seasonal décor

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and is anything else needed to install them?

The pack contains 40 double-headed bear claw screws. No wall anchors are required or compatible; a Phillips screwdriver or power drill is all you need for installation.

Which version should I choose for drywall versus wood studs?

These .8 inch (25 mm) screws work in both materials. On drywall they hold up to 33 lbs; drive into a wood stud for the full 100 lb capacity.

What does the 33 lb drywall rating mean when I hang a heavy mirror?

It means the screw alone in drywall can support 33 lbs. For heavier pieces, locate a wood stud behind the drywall and drive the screw into the stud to reach the 100 lb rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.