Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00932342BTC
In stock
DORMONT
DORMONT 10A-2131V2KIT-TS-24B Gas Flow Valve Kit 3/8" 24" conduit
A 24-inch, 3/8-inch stainless-steel gas conduit rated for 0.5 psi at 70 °F and certified to ANSI and CSA standards
- TypePipes, Valves & Fittings
- Reliable gas flow with 304 stainless steel construction
- Meets ANSI Z21.15 and CSA 6.16 safety standards
- Operates from -40 to 350 degrees Fahrenheit
- 24-inch length provides flexible installation options
- FNPT fitting ensures secure connection
Gas Flow Valve Kit for Low-Pressure Lines
This DORMONT kit provides a 24-inch stainless steel conduit with a 3/8-inch outside diameter. It is rated for a maximum working pressure of .5 psi at 70 degrees Fahrenheit. The assembly suits gas-flow applications that require the listed ANSI and CSA certifications.
304 Stainless Steel Hose with FNPT Fitting
The hose tube and both end fittings are made from 304 stainless steel for corrosion resistance. One end carries an FNPT thread that mates with a matching male pipe fitting. The kit operates across a temperature range of -40 to 350 degrees Fahrenheit without additional protection.
Certified to Multiple ANSI and CSA Standards
The valve kit meets ANSI Z 21.15, 21.18, 21.24, 21.41, 21.69 and 21.90 along with ANSI/UL 567 and CSA 6.16, 6.24, 6.9 and 6.3. Builders needing higher pressure ratings or different thread types must source a separate assembly.
Highlights
- Reliable gas flow with 304 stainless steel construction
- Meets ANSI Z21.15 and CSA 6.16 safety standards
- Operates from -40 to 350 degrees Fahrenheit
- 24-inch length provides flexible installation options
- FNPT fitting ensures secure connection
Specifications
| Brand | DORMONT |
|---|---|
| Type | Pipes, Valves & Fittings |
Questions about this item
What pressure limit appears first when this valve runs continuously?
The maximum working pressure is 0.5 psi at 70 °F, so that ceiling is reached before any higher-pressure condition.
How hot does the hose get and what noise or power draw should I expect during all-day operation?
The assembly is rated from -40 °F to 350 °F with no moving parts, so it adds no audible noise and draws no electrical power.
Which gas-thread connection must already be on my supply line for the FNPT fitting to seal?
The kit ends in a 304 stainless-steel FNPT fitting, so the mating male NPT thread must be present on the existing pipe.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
